subject: Some Tips To Build Your Own Solar Panels [print this page] When you decide to build your own solar panels for your home, it will be important to take some steps that will make the project easier and affordable. Producing and installing solar panels on your home may require building permits for the project. Finding out what the building codes are for your area will save you money from the inception of your project.
Making contact with a person who has experience in solar panel installation in your area is another tip that will save you time and money. Each area has unique needs and requirements for different types of building. Talking to a person who knows which panels will be more effective in your area will help you to build and install your panels in the best location on your home.
Before starting your project it will be important to get detailed plans for building and installing the panels. These plans will have a list of the items you will need and the different energy levels you can expect to get from different types of panels. Producing enough energy to run your home is a key to success, you need to plan on building and installing large panels that will be capable of storing energy on cloudy days.
The panels that are used can be purchased or made as part of your project. If you decide that you want to make your panels from scratch, start small. The small solar cells can be very expensive and as each cell is tied together they need to be tested. The average home will need about 41,000 square inches of solar panel. This is over 250 square feet of solar panel.
Knowing how much energy you use in your home will be important when planning your project. Many people decide to use smaller solar units and cut down on their energy usage. However, remember that the solar panels you produce will be staying with your home if you sell it.
Maintaining the value of your home for resale is important. Get plans that provide an adequate supply of energy to your home on a consistent basis without the need to reduce energy usage.. When you build your own solar panels, make sure that you plan for normal energy usage and not for reduced consumption of energy when the panels have been installed.
