subject: INSTRUCTIONS FOR CARPET CLEANING [print this page] INSTRUCTIONS FOR CARPET CLEANING INSTRUCTIONS FOR CARPET CLEANING
To keep clean our house carpet cleaning is most essential part. There are some basic points that we should keep in mind.
First of all, make sure that the carpet you will be cleaning is well prepared. We can clean carpet by vacuum cleaning. If this process is properly done, 79 percent of all carpet soil can be removed by dry vacuuming. Most carpet cleaning companies recommend customers to vacuum prior to their arrival. Vacuuming should be done on regular basis.
In foam cleaning, with the help of a machine buffer, you can release the shampoo onto the surface of the carpet while the brush works though the fibers to spread the shampoo, minimal amount of water is also used. After this you have to wait for a couple of hours before the shampoo dries up and then vacuum the whole carpet thoroughly so that all the dirt, shampoo and water is extracted out from the carpet, leaving it nice and clean.
Best suited for the commercial establishments rather than at homes, bonnet cleaning doesn't really go well with the materials that most home carpets are made of. In this case shampoo is applied to the carpet and the bonnet is placed at the base of the buffer and this is used over the carpet to absorb the dirt and soil, as you see the bonnet getting dirtier you will get proof of the cleaning of the carpet, keep using the same bonnet as long as you can eventually replacing it. Finish the task by vacuuming the carpet.
It is highly advisable that you use a warm water solution to clean your carpets. This is because warm water is efficient in eliminating oils and grime faster. The next step is to apply a commercial cleaning solution to the carpet, although experts believe that a mix of water and vinegar does the trick as well.
Steam cleaning process is also known as hot water extraction. It starts by having a detergent-based solution to the carpet. When the solution has properly soaked in, a pressurized manual is then passed over the carpet several times, until all residues have been rinsed out. Steam cleaning is one of the most preferred methods in carpet cleaning services as it removes more dirt and odor and is suitable for valuable carpets.
Sometimes vacuums are not enough to lift stubborn stains from carpets and the only alternative is to seek the help of professional companies specializing in carpet cleaning. One method that is commonly used is dry extraction cleaning, which is suitable for sturdy fibers and synthetics.
The method is also recommended for wool and cotton natural fibers that are not to be exposed to too much moisture. Specially designed brushes and machines are used to infuse absorbent compound that contains solvents and special detergents into the carpet fibers. This compound is like a tiny magnet that attracts oils, soil, and dirt trapped in the carpet, and together they are removed by vacuuming.
These are some useful methods by which we can clean our carpets. We can hire some cleaning machines.
