subject: Everything You Need To Acknowledge Concerning Brick Siding [print this page] Primarily resulting from its composition, veneer brick can act as a wonderful material with which to build. When using this brick style, there are many advantages to be had. In the installation process of standard brick, it is typically a lot easier to put in this brick type. It is also generally simpler to maintain this material than compared to other potential building supplies.
Brick veneer is very different than normal bricks. Essentially these bricks are made from clay and other components, like gravel and cement. Polyurethane is also a common item used to make this brick type. The bricks can be created from recycled and salvaged materials found in old, destroyed buildings.
There are quite a few advantages that result from using this kind of material. The most widely enjoyed benefit is the price difference. These materials are generally a lot cheaper when comparing their price tag to standard brick types. Since the bricks only use about a quarter of the ingredients normal bricks do, their price can be significantly lower. Additional advantages include being fireproof and durable, along with acting as great insulation.
The installation price tag is cheaper, too. If you can, it is much better to have a professional mason install the brick, but it is not absolutely necessary. When comparing the installation process of typical brick, this brick type does not require nearly the same level of time, effort, or skill. Being lightweight makes this building material very easy to manage, as well. Remember, though, that brick veneer is too light to be sustained as a load bearing material.
If possible, it is better to have a professional install your brick veneer. However, if you decide to do so yourself, remember to keep the following points in mind. The bricks are roughly an inch thick. As such, there are two methods for installation. You can either mount the brick on plywood and install it as one cohesive piece, or adhere it straight to the desired surface.
If you are going to use this material as an external covering, such as for outdoor siding, keep in mind that it is a porous compound. As such, water and air can penetrate the brick. This can lead to serious problems, such as water damage. To avoid this simply remember to install the bricks with a vapor barrier that will separate the wall from the veneer panels.
In colder areas around the world, it is important that this brick style be installed using a sealant. If this step is neglected then the material will start to flake as a result of the damaging effects of frost. Sometimes stains will show up on the surface of the brick. Hard water, mildew, and moss will occasionally develop. Removing these stains do not require a lot of work. After a basic scrubbing these spots generally wash away.
