subject: Vibrating Screen Maintenance And Repair [print this page] Vibrating screen maintenance and repair Vibrating screen maintenance and repair
Vibrating screen is also named vibratory screen, it's maintenance and repair are essential for miner.
The purpose is to understand the overall situation of sieve, and to repair or replace damaged, worn parts to make it work. The work includes daily maintenance, regular inspection and repair.
1.Daily maintenance
Check screen surface, particularly the fastening situation of screen surface. If loose, fasten it. Regular clean sieve surface. for patent leather off area, promptly repair, rust removal and painting, the exposed finished surface should be coated by industrial Vaseline to prevent rust.
2.regular inspection
It includes weekly inspection and monthly inspection.
1.weekly inspection. Check the tightening conditions of exciter, screen surface, supporting devices. Tighten where are loose. Check transmission status and the use situation of locking bolts. Check the belt tension level, if necessary, appropriate tension. When check sieve, pay attention to whether the imbalance weights in the flywheel were fixed reliably. If not reliable, when it is running, the unbalanced weights may be out of the flywheel, resulting accidents.
2.monthly inspection. Check the wear condition of screen surface. If find significant local erosion, take the necessary measures, such as exchange location, etc, and re-tighten the screen surface. Check the screen box, check the main beam and all the main beam welding, and carefully check the local cracks. Check all bolts situation at sieve box side, when find loose between clearance and side bolts, replace the new bolts.
