subject: Hp Laserjet 4000 Printer Using Hp 27x Toner For Business [print this page] The HP LaserJet 4000 printer is ideal for a business that needs a monochrome laser printer. An easy to use printer with many features, it offers a power saver that you can program in just minutes and a long-lasting HP 27X toner. It's easy to set up and offers reliable speed and high resolution.
The printer will print a fast 17 ppm. The moment you click to print it takes approximately 12 seconds to start printing. It has speed, but also gives quality output. There are up to 220 levels of gray scale giving photo grade printing. The default resolution is 600 x 600 dpi. This can be increased to 1,200 x 1,200 dpi if you should need it, but this will decrease pages per minute printed. It is capable of printing 65,000 sheets per month. One toner cartridge will print 10,000 sheets. The printer will warn you when the toner is low. It uses HP LaserJet 4000 cartridge which gives very crisp, clean text.
The printer paper tray will hold a whole ream of paper, 500 sheets. The feeder tray holds another 100 sheets of paper or 75 envelopes. A total storage of 600 sheets. If duplex printing is needed there is an optional duplex tray. There is also an additional paper tray that holds 500 sheets that is available. That would be a total of 1,100 sheets ready for printing before needing to add paper again. The output tray has sensor so you are aware of when the 250 sheet tray has been filled.
There is a second output tray located in the rear of the printer. This tray holds 50 sheets of paper. The 100 sheet feeder tray outputs here. This gives the ability to print more than one type of document of different sizes. The printer can print several different page sizes, including standard and legal size paper. It is able to handle any weight paper from 16 lbs to 53 lbs.
The printer has a 100 MHz processor. It is capable of network printing with two EIO slots to connect to the business network. It has an internal 4 MB memory. The memory is expandable up to 100 MB. Three DIMM (dual in line memory module) slots will hold 4, 8, 16 or 32 MB of RAM. With more memory print jobs will process more quickly, eliminating any back ups.
The Windows and Mac operating systems both work with this printer. Flash memory can also be used with the printer. It is used for fonts, forms and signatures. There are two slots for the flash memory. They hold either 2 MB or 4 MB. Serial and parallel ports are available, as well as a 10/100 Ethernet interface.
This printer is a space saver. It is 15.4 inches in width, 13.3 inches in height and 16.77 inches in length. A desk top or any central available space is all that is necessary. The weight is a light 39.27 pounds. Once one of the additional paper trays is added the height changes to 18 inches.
