subject: Diy Guide To Fixing Car Brake Problems [print this page] You should learn to repair frequent car brake problems yourself as a price-saving measure. Braking systems are the most essential security feature within the car. You should therefore diagnose braking issues often do not wait until something is improper, because it may be too late. If the brake light is on, this is an indication that the brake fluid level is low. That is dangerous because excessive friction in the brake pads causes wear and tear.
Another of the common brake problems is high-pitched squealing or scraping noises whenever you brake. This is an indication that the brake pads have undergone wear. One reason for this problem could also be inadequate braking fluid within the braking system. Another potential trigger is particles that might have found its way into the system. To solve the problem, replace the braking fluid. If this noise looks like a grinding of metal-on-metal, this is an indication that the problem is past salvage. You ought to be cautious when this happens because it means there's a threat of ruining the drums or the rotors. To repair this problem, replace the brake pads.
The next known common brake related problem is locked brakes. This leads to sharp bends whenever brakes are utilized and in some circumstances, the wheels lock up and the car skids. The causes of this problem could possibly be issues with wheel bearing, faulty disc caliper, broken or loose brake pads, or particles on the brake pads. To remedy this problem, verify the calipers, the brake fluid level and the brake pads and depending on what the problem is, you can replace the brake fluid, tighten or replace the brake pads, or replace the disc calipers.
Another of the common brake problems is a burning chemical or rubber smell. That is normally brought on by clutch issues, but burning brakes might also trigger it. Burning brakes are normally an indicator that the emergency brake is on. If there is some resistance and noise from the wheels, this is an indicator that there are unwanted particles within the system. If replacing the braking fluid does not work, replace the brake rotors.
Last but not the least as they say, a frequent car brake problem is the car pulling to one side whenever you brake. This is an indication that there isn't adequate hydraulic pressure in a single side of the system, there might be front-end issues, or the brake could also be sticking. To remedy this problem, verify the brake calipers and the brake pads and make the mandatory replacements. If the brake pedal is mushy or soft or if it hardens whenever you pump it, this is an indication that there are air bubbles within the brake lines. You need to do what is known as 'bleeding the brakes', which is basically the removing of those air bubbles. If the brake pedal is slowly sinking to the floor intermittently or whenever you step on it, this is an indication that there is a problem with the brake's master cylinder and it will require replacement. If the brake pads are vibrating, use anti-squeal lubricants and if this doesn't work, replace the metallic gasket that lies between the piston and the brake pad. You should learn about these and other car problems and potential fixes as soon as you purchase your car.
