subject: Follow These Steps To Reset the HPD2500 Printer Cartridge [print this page] Follow These Steps To Reset the HPD2500 Printer Cartridge
For the Hewlett Packard printers, you can reset the unit in two ways, hard or soft reset. If you want to get the safer result for your printer, then you should try the soft reset. Just in case the soft way is not working, you then can try the hard reset. By resetting the printer, you can help the printer to function in proper way.
You can start the soft reset by removing the USB cables for the printer which is attached to the computer before you do anything else. After you remove the cables, then you should restart the computer. The next step is taking out the cartridge by undoing the clips in the printer. Do not forget to return the locking clips to their position and shutting the door of the printer.
It is also important to turn the power off and unplug the unit. You need to let the printer for one minute before you can plug it back. After that, you can insert one cartridge and the printer can print the test page. To check whether there is an error or not, you can print the second page. You can plug the USB cable to your computer. You will need to print your documents to check whether it works properly or not.
If the soft way is not working, you then can try the hard reset. Start the process by removing the USB cable from the computer. You should also restart your computer. Taking the cartridges has the same process as with the soft reset. Do not forget to remove the paper. After the cartridge is removed, you can close the printer's door.
The next step is unplugging the power from the printer's back and the wall protector. You can open the printer's back door to find the clutch button. You should pull the clutch to the printer's backside. You can let the clutch go and continue to roll the wheels for two times. You have to move the wheels until they click to the place. Then, you can close the back door and turn on the printer.
Return the cartridge to the place. Do not forget to test the printer to see the result. If you get the correct work then you should put the second cartridge to the place. It is better for you to print the test page. After doing every thing, you can connect the printer with the computer by using the USB cables.
