subject: Smart Ways to Use Remove Staples Using a Stapler Remover Without Tearing the Paper [print this page] Smart Ways to Use Remove Staples Using a Stapler Remover Without Tearing the Paper
Using staplers will give you the easiness to bound sheets of paper together. But, sometimes it becomes frustrating when the staples do not go to the right position. If you have this problem, you will want to remove the staples so that you can staple the paper again.
However, you might be afraid of tearing the paper since it is a fragile thing when you remove the staples. But, you will find that staples can be removed successfully by using the stapler remover that you can buy in the market. Follow the following tips so that you can remove the staples without tearing your paper.
1. You should check the fragile level of the paper. To do this, you can look at the thickness and the weight of the paper. You will find that, if the paper is fragile, you should do the removal very gently.
2. You should take a knife or letter opener. Then, insert it on the backs of the staple that you are about to remove. After you feel that you have the safe position, you should straighten the back parts of the staple. You will find that this can slide quietly through the holes in the paper.
3. You should place your less dominant thumb on a side of the staple. You should also place your index finger on the other part. After that, you should hold this tightly.
4. You should take your staple remover by using your dominant hand. Then, you should prepare for removing the staple. In this matter, you have to remember that you must do the gentle motion when removing the staple from a piece of paper. When you have thicker paper, you can use a little more force.
5. You should clasp the remover under the staple and then pull it out slowly. You will find that this you do this correctly, you will find that there is no tearing on your paper.
