subject: Cleaning Auto Glass [print this page] Cleaning Auto Glass Cleaning Auto Glass
Here's how it works:
* Step 1. First, you need to remove or clean what is on the surface of the glass. Pre-spray your towel and also spray the area being cleaned. Allow to dwell for a few seconds
* Step 2. Using one dedicated cleaning towel, fold it into fourths as you are going to flip it during use. Use a "box" like pattern, spreading the cleaner around the perimeter of the space being cleaned. When done, work your way through the "box" until the surface is covered with cleaner.
* Step 3. Flip your towel and buff the cleaner dry. This will remove all soils, fingerprints, and other impurities.
* Step 4. If necessary, use the 2nd towel (drying only) to quickly buff/polish the glass to a high shine and invisible-like clarity.
Why this towel/cleaner combination is superior:
* The Towels: Our towels use a low-nap process. Thus, you are not left with strands of fibers resting on the glass. In addition, these towels can withstand 100s of washes. You should never need paper towels again! Remember, wash them with NO softeners added and keep them separated from cotton towels or any towel you use with wax products--we don't want to coat the fibers with wax that will transfer to your glass.
* Paper towels cause scratching! We have seen scratches on Plasma screens and other sensitive glass from paper towel use or even cotton towels.
* Invisible Glass was developed with two simple objectives: superior cleaning power and "invisible" clarity. When you compare Invisible Glass to ordinary "blue water" glass cleaners, you'll immediately see how quickly it removes even the most difficult grime and makes glass virtually "disappear." Use Invisible Glass to clean windows, mirrors, windshields, and glass surfaces at home, work, and play.
* Other glass cleaners contain dyes, scents, soaps, and water. These inexpensive ingredients remove just basic dirt and leave streaky residue with is difficult or impossible to remove. Invisible Glass contains NO soaps, foams, scents, or dyes. It evaporates quickly and completely, leaving glass clean and clear with NO streaks, haze, or residue.
* Safe to use with OEM (original equipment manufacturer) and most aftermarket tinted windows. Always test on non-glass surfaces before using. Not recommended for use on polycarbonate plastic.
