subject: In Building Wireless Systems [print this page] In Building Wireless Systems In Building Wireless Systems
Although there are many types of wireless systems, the need for in building wireless systems is felt strongly. The reason for this is also very simple and convincing. With each passing day, wireless network infrastructure is seeing a steep rise in terms of customer base and spending. Wired communications has several limits, which can be overcome very easily with the help of wireless communication.
In this context, then, in building wireless systems are those that allow a wireless network infrastructure to be set up right within the building where it is required.
Feasibility of in Building Wireless Systems
It should be noted that an in building wireless system is only feasible when it is close to a wireless tower, or when the wireless tower (or mast) can itself be installed on or near to the building premises. Failing this, the wireless signal will not be of sufficient strength and the resulting wireless network infrastructure will remain inadequate.
Details of in Building Wireless Systems
If you are going to install the system in your building premises, it is always a good idea to learn about the various components that go into making one. This ensures that the planning of the system goes well and that there are no operational hiccups at the last moment.
In building wireless systems can be set up for both LAN as well as broadband. It is best to go for a 3G-based service model, which will provide the best performance for the in building wireless system. Repeater and Fiber solutions should be thought of much in advance.
Here are some of the important parts of in building wireless systems:
Broadband backbones These are the basic, backbone networks that can be of both the primary as well as the secondary type.
RF designing It is important to work out and design the RF circuits in advance to avoid any situation related to loss of signal strength and signal weakening.
Installation and implementation This includes installation of cable guides, optical, coaxial cables, and so on.
Project management The aim here is to complete the task in the minimum amount of time, and with the minimum possible expenditure.
Conclusion
Setting up an in building wireless provides you with a reliable and secure system for all types of communication, but requires special expertise.
