subject: How To Build Indoor Playground Equipments? [print this page] A china indoor Climbing Wall assembly having wall panels to form free-standing, wall-mounted or a combination climbing wall assembly. The climbing wall assembly further has novel handhold structures constructed to be used with removable elements to form a challenge course.
A climbing wall assembly comprising: a) at least one wall panel constructed and arranged to be joined by adjacent wall panels, at least one hand hold structure mounted to said at least one wall panel, said at least one wall panel having a plurality of apertures to provide a plurality of climbing paths, means to attach said at least one hand hold structure to said at least one wall panel, said means to attach being fixed in each said aperture; b) each said hand hold structure having a first aperture therethrough, said first aperture being constructed and arranged to receive said means to attach said hand hold, said hand hold further having at least one second aperture having a generally cylindrical configuration with an inner peripheral protrusion; and c) a removable structure for insertion into either said first aperture or said at least one second aperture for use by a climber of said climbing assembly, said removable structure being either an elongated polymeric foam cylindrical member for insertion into said at least one second aperture and protruding substantially outward from the surface of the hand hold or a cylindrical magnetic member having a flag attached thereto for insertion into said first aperture.
Indoor Climbing walls are a fun way to exercise and have fun at the same time. If it is not possible for you to go to a place that has a climbing wall, or if you are really interested in climbing, then you might consider making one for your own personal use. Making an indoor climbing wall uses the same processes as making an outdoor one. The framework must be sturdy enough to support the weight of a full-grown adult. Since they are so large, it can take quite a while to make one, so be sure to leave enough time for that. The height of the wall also depends on your ceiling height, so be mindful of that when designing the size.
A climbing wall assembly comprising: a) a plurality of wall panels arranged in a side by side wall panel configuration; b) a plurality of hand hold structures mounted on said Indoor play equipment to form a climbing course, each said hand hold structure having at least two bores, one said bore being constructed and arranged to receive a metallic fastener for mounting of said hand hold structure on said climbing wall; and c) at least one elongated flexible member having two ends and a length, each said end for insertion into the bores of different hand hold structures to thereby form looped obstacle for a climber to pass through.
Decide what you want your climbing wall to accomplish. Then consider the space that you will use to build it in. These will be the parameters for your wall.Make careful plans when designing your climbing wall. As people will be using it heavily, it needs to be designed very well for safety reasons. It is important to make detailed plans both on paper and with a scale model. Be sure to consider whether or not your climbing wall will attach to a pre-existing structure. That will make a difference in how it is built.
The present invention relates generally to inflatable slide manufacturer assemblies. Particularly, the invention relates to climbing wall assemblies utilizing cooperating structures and devices, including fixed and freestanding climbing wall structures, to form challenge climbing courses using novel hand hold structures, flexible noodle-like members, magnetic flag pegs and wall panel bolt covers.
Artificial climbing and bouldering walls are increasingly used due to physical fitness awareness and interest in climbing and bouldering sports. Climbing wall assemblies are also being provided to introduce children to the climbing sports in a safe, convenient and educational manner. Various devices have also been introduced to make climbing for children a fun and educational experience. Exemplary climbing wall assemblies and devices are disclosed in Applicant's pending U.S. patent application having Ser. No. 10/236,728, filed on Sep. 6, 2002, and in the patent application entitled Safety Mat Securement Assembly having Ser. No. 60/545,543 filed on Feb. 18, 2004, the teachings of both being fully incorporated by reference herein.
One of the best materials for this step is heavy poster board. It kind of represents what the wood will look like. The most important step when making the model is to make sure that none of the poster board is bending in any way. The model has to be an exact replica of what the final Indoor play equipment will look like. The best scale to use is 1 inch representing 1 foot.
The framework is the most important part of the wall. Use small nails to put the framework together temporarily while you adjust to make sure that the framework is square. Drill holes in the same place on each side where the screws will go. Square the frame again, and drill the screws in. Repeat this for all frames. Measure diagonally from each side to check that it is square. If the measurements are not equal, then the frame is not square. Joints are very important. Reinforce all studs and joints with screws. When angles join, cut the pieces so they fit together smoothly. To anchor the frame (also called the ledger board) to the wall, it is necessary to attach the frame with lag screws to the wall. Use a washer with these screws so that they dont bite into the wood. Attach the joists with joust hangers to the ledger board. Be sure to anchor everything at the top and bottom of the wall. Attach the top plate of the climbing wall to the ledger with two screws per joust, 1 per side.
The framework is the most important part of the china indoor Climbing Wall . Use small nails to put the framework together temporarily while you adjust to make sure that the framework is square. Drill holes in the same place on each side where the screws will go. Square the frame again, and drill the screws in. Repeat this for all frames. Measure diagonally from each side to check that it is square. If the measurements are not equal, then the frame is not square. Joints are very important. Reinforce all studs and joints with screws. When angles join, cut the pieces so they fit together smoothly. To anchor the frame (also called the ledger board) to the wall, it is necessary to attach the frame with lag screws to the wall. Use a washer with these screws so that they dont bite into the wood. Attach the joists with joust hangers to the ledger board. Be sure to anchor everything at the top and bottom of the wall. Attach the top plate of the climbing wall to the ledger with two screws per joust, 1 per side.
Drill the holes in the plywood before hanging the indoor playground equipment . This is much easier. Drill from the climbing side, to avoid splinters. Use a chalk line to mark parallel lines on the sheet 8 inches apart. Start this pattern 4 inches from the edge of the sheathing. Use a 7/16-inch bit to drill through both pieces of plywood. Doing this will give you 72 t-nut holes equally spaced so that no 2x4s are hit. Dont install the t nuts until you cut the wood. Cut the sheathing to the size needed for your project. Install the t nuts into the holes that you have drilled. Glue them in, and use a hammer to get them in good. This is important for safety. Install the sheathing after one final check of the framework.
It is also desirable to allow climbers, particularly young climbers, to play games and participate in initiative tasks on the climbing wall. Magnetic flag pegs are provided to be used in cooperation with the wall assemblies of the present invention so that such games and tasks may be executed by young climbers through placing, moving, grabbing and tossing the various magnetic flag pegs.
It is also desirable to provide an aesthetically pleasing climbing wall structure. Bolt covers are provided by the invention to cover the bolts or fastener used to secure the china indoor Climbing Wall panels. For example, recessed and non-recessed bolts are provided to secure and mount climbing wall panels to an existing wall or other substructure. Panel bolt covers of the present invention are provided to match the panel surface and to give the climbing wall a uniform look. Prime the wood. Mix 1 part of sand to 10 parts of paint in the top color. Once the primer has dried, apply it to the wall. Be sure to plug the t nut holes. If you are adding the climbing hand and foot holds to your wall, now is the time to install them. Be sure to get them very securely fastened.
