subject: Be Secure With Griplock Systems [print this page] There are locations of nearly every shape and size that use suspended lighting for their areas. They are in restaurants, clubs, museums, art galleries, stores, and more. In order for these lights to be safe, look good, and function properly, there must be a rigging system that can fully support them. That is why sites such as USALight.com supply Griplock systems for those who wish to have a slightly more complex way of lighting an area compared to traditional forms of lighting. Anybody who is in an industry that requires suspended lighting to be used can vouch that safety is one of the most important factors when it comes to that form of lighting. Therefore, with Griplock systems, safety can be ensured since they adhere to some of the high industry standards. This is why USALight.com carries them with utmost assurance.
Griplock systems have the ability to suspend up to 1,500 pounds of weight. Therefore, the first step that should be taken when considering getting a Griplock system is the weight of the lights that will be suspended. The total weight and the size of the lights will help to determine exactly which cables are needed in order to safely suspend the lights. There are several different size cable and gliders that can accommodate the specific lights that are being used.
The next step when preparing to use a Griplock system is what type of ceiling the system will be suspended from. Griplock systems provide a wide variety of installation tools that are needed in order to use the systems in a variety of settings. There are brackets, couplers, and connectors that are made to hook into a variety of ceiling setups. For example, there are couplers that can be used with bracket bars, T-bar clips, cement, steel, and threaded studs among others. This gives them great versatility in order to be attached to whatever setting they are required.
The cables that are used are very strong and it has been determine that there is a 5:1 ratio between the strength of the cables used and the weight that they must support. This means that the cable can as much as 5 times stronger than the weight that it must hold up. However, it is noted that there must be proper components that are chosen when preparing to create a lighting rig. Without the proper equipment, the effects can be incredibly dangerous. It is also noted that while the Griplock systems are relatively easy to install, they are not for amateurs. Professional lighting technicians and competent handymen are better candidates to install a Griplock system as opposed to someone with little to no lighting experience.
USALight has made a good choice when opting to supply Griplock systems. They make order a Griplock system incredibly easy. In fact, what is required is that the website is contacted with information on the desired rig such as setup, size, and weights. The people at USALight.com will then assemble all the parts that are necessary in order to install a Griplock System.
