subject: Assembling And Using Your New E Cigarette Step By Step [print this page] It is an exciting day for a tobacco smoker who has just received their new e cigarette starter kit. They usually open the box and are very anxious to get started using it right away and that is exactly what they should be able to do. All you have to do it open it up and get it assembled, which should take less than a couple of minutes!
First of all, there are three main components of the e cigarette that will have to be attached to one another. The battery stick, of which you should receive two in a starter kit, is the part of the device that is recharged using the wall charger that should also be included in the box. However, normally both battery sticks will come fully charged and ready to use. It is important to remember that when you have depleted the energy in the first battery stick, it should be screwed into the wall charger and left on it for the recommended amount of time in order for it to be fully charged again and ready to use when you have depleted the energy in the second battery stick. Then you simply repeat the process by alternating the battery sticks on and off the charger so that you always have one ready to use.
Once you have your battery stick in hand, next comes the atomizer. It is a small, round metal object that will likely be in a plastic cellophane wrapper. Remove it from the wrapper and screw it directly onto the open end of the battery stick. This is what the air you suck through the device goes through that heats it and creates the warmth for the vapor you inhale.
Next, you will open a box of nicotine filters. This is basically what your nicotine and flavor is housed in. The filter simply slides onto the end of the atomizer. Now you are ready to begin using the product. When you first begin to puff on the e cigarette, the end of the battery stick should light up each time you puff. You should know that when you first begin using a brand new or even a refilled nicotine filter, it might take several puffs before any actual vapor begins to form. Once you begin to see and feel the vapor sensation when you inhale, the device should be working properly. Once the vapor has begun to form, puff gently and inhale until you become accustomed to the sensation. Your e cigarette should form the vapor very easily the next time you pick it up and begin to use it until the nicotine filter is almost depleted.
If the light on the end of the battery stick begins to flash or does not light up at all, then it needs recharging. A average user might use up one battery stick a day, but depending on how often and how long it is used, you might need to engage the second before a 24 hour period is up. The nicotine filters are equivalent to approximately 15 tobacco cigarette and should last an average user all day or close to it. Once again, depending on how much you use it. You should use your e cigarette about the same amount of time and the same number of puffs as you would with a traditional tobacco cigarette. When you can no longer get the vapor to form and you feel no sensation, then it is time for a new nicotine filter. Do not dispose of the empty filter because they can be refilled with e liquid if you choose to do so.
If there are any other issues that come up with your device and you can not figure out what it wrong, then you should contact your e cigarette distributor and they will likely be able to tell you what the problem is and help you to correct it right then or let you know if a replacement part is needed.
