subject: The composition of laptop battery [print this page] The composition of laptop battery.Laptop battery from shell, Liteon m500 Adapter circuit boards and batteries, belonging to lithium-ion battery. People are talking about batteries in general refers to the number of batteries within the battery, mAh refers to the laptop battery capacity. Mainly by the protection circuit board (or the secondary protection circuit), and the capacity of directed circuits of two parts, notebook battery charge and discharge and safety management.
Laptop battery standby time mainly by the mAh value to decide. Under normal circumstances, a few more batteries, mAh value is greater the longer standby time. Laptop battery life mainly by the charge and discharge times to measure the quality of the products are generally eligible for 500-600 times. Therefore, the effective use of laptop batteries within a period of two years, expired the battery will be aging, standby time affect the sharp decline in the mobility of notebook computers.
Laptop battery tips In fact, how to make good use of laptop batteries battery, how to extend their use of time and the use of life and so on, is undoubtedly the troubled minds of the majority of notebook users, a problem, the use of laptop batteries There are many methods and techniques, which requires us to usually use more learning and application. (A) rapid access to hibernation Temporary non-use of laptop computers, in order to conserve battery power, we can set the power management program, allowing the system to enter sleep mode after a period of time, but this is a shorter or longer will have to wait a few minutes, there is no way to make laptop computer system immediately enter the sleep state? Notebook computer system to enable quick access to dormant Liteon aspire 1200 Adapter state of a simple method is to directly close the display. Press the display would require little effort, you can make notebook computers into sleep mode immediately and effectively conserve battery power. When you need to re-used time, as long as the opening screen, the system will automatically return to pre-operational state.
(B) the screen-saving mode TFT screen is the largest notebook computer power components, in order to reduce its use of the battery when the power consumption, notebook manufacturers have devised ingenious schemes, but in general are based on the lower screen brightness, and even turn off the screen method. In some notebook computer's power management settings you can customize the brightness of the screen, most of notebook computers by a specific shortcut keys adjust screen brightness, generally 6 to 8-level brightness adjustment. (C) energy-saving settings Desktop machines using alternating current, most people may not be the computer attached great importance to energy-saving features, but need to use battery-powered notebook computers, the use of energy-saving features should be taken seriously. How to design computer hardware more energy-efficient, this is not a user problem to be solved. The user can do is set up on the computer the effective use of energy-saving option. Energy-saving settings require the user to adjust two: First, the computer's BIOS setup program on the energy-saving mode in the settings; most important thing is there are many energy-saving in the operating system settings and operations. In the practical implementation of computer systems, Windows systems should take precedence Liteon presario 1200 Adapter over energy-saving settings in the CMOS settings.
