subject: Types Of Welder Pipe Turning Rolls [print this page] Mitrowski welding pipes are available in both new and used turning rolls. You could also get some tanks turning rolls that are reconditioned or refurbished. You can also have carry rotators or pipe turning rolls. There can be gotten in different sizes ranging from 1000Ib to 1000 tons. You can get them in different brands and can be rented or bought. The complete sets come with extra idlers, fit up rolls and self-aligning tanks. Some companies do accept trade-ins. There are different types of welder pipe tuning roll.
There are the 20-ton Teledyne turning rolls that come with two drivers and one idler. It also has a space master SCR with a voltage input of 460 volts. It is also controlled by a remote pendent and its wheel measurement is 9 inch by 20 inches for the drivers while those for the idlers are 8 inch by 20 inches. In most cases, the wheels are in poor conditions and come with no warranty. They are a smaller version of the welder pipe-turning roll.
You could also get the 1500 LB pipe-turning roll if you feel that the 20-ton Teledyne is not doing sufficient work for you. This machine uses lesser voltage of 120 volts and has a variable speed of 0-8 RPM (Revolutions per minute); it has a diameter of one and a half to sixteen inches on its wheels.
The machine is protected from high frequencies and is likely not to get spoilt when the power voltage changes rapidly. It also has a shipping weight of 147 LBS. Its wheels are much safer and more reliable. There is an even more sophisticated one than the 1500 LB pipe-turning roller; the 4000 LB Pandjiris piper-3 turning rolls. The only difference with this one is that is has a remote hand pendant and a gearbox on axle, it has rubber wheels of twelve inches by three and a half inches.
The new 4000 Lb pipe-turning roller of half horsepower mother with dart SCR speed control also has a gearbox on the axle. They are blue in color and come with one driver and one idler. It user 120 volts as its normal input and it accepts pipes that are of two inches to sixty inches in diameter. Just like the Pandjiris pipe-3, it also has an axel gearbox to help manage the larger pipes. It has more manageable, firmer wheels that can help withstand the larger pipe diameters. This type of turning pipe is mostly available in the blue color.
There is then the ransom used turn roll. It is also 4000 LB capacity, it has twelve-inch rubber wheels and can process 1.2 to 37.7 inches of steel per minute. It also comes with three rangers and uses a voltage power of 120. Lastly, there is the 10-ton tank turning rolls. This one has a capacity of 10000 LB and has a range of six inches to 13 FT with twelve rubber tires. However, it only uses 120 volts.
