subject: Installing a Pool Pump Motor [print this page] Installing a Pool Pump Motor Installing a Pool Pump Motor
These pumps are installed in pools to permanently keep the water circulation going. The pool pump motor is the fundamental and essential part of most of the filtration systems. It can remove thousands of gallons of water a day and its malfunctioning is also very common. These pumps provide motor force to tubes and drains. At times, the pumps do not work smoothly due to several issues. Heating can be one problem, so it is advised that the pumps must never be placed under the window of a house directly. The diagnosis of the problem in pool pump motors is easy. When a pump has to be replaced, the pool size should always be taken into account and then only a new pump purchase must be done.
Installation of these pumps is an easy, straightforward and simple task which can be done in round about an hour. The trap basket of a pool pump should be kept clean and this should be done without striking the basket, so that any damage to the basket can be avoided. For efficient performance, the pump has to be fixed as close to the water source as possible. They are built in such a pattern so as to provide good quality performance. Today we also have pumps which are energy savers. The pool pump motor should also be self priming and one should always hire a professionalfor wiring. The pool pumps should be stored in dry well ventilated places or kept covered to avoid damage from freezing. The pumps have impeller, motor stands, and also see through lid, which provide quick visibility and many of them also have seals of stainless steel, allowing silent operation.
