subject: The Whistler XRT 695 Tips [print this page] The Whistler XRT 695 Tips The Whistler XRT 695 Tips
Frequencies which reflect off objects and are then picked up by the radar gun's receiving section. When a radar beam reflects off a moving target, a measurable frequency shift
occurs. The radar unit converts this shift into miles per hour to determine your vehicle's speed. And then you are given a speeding ticket for going to fast. So what you need is a Radar Detector enter the Whistler.
Your Whistler detector is expertly engineered and designed to exacting quality standards to provide you with reliable, trouble-free operation. If your unit has been correctly installed following the guidelines in this manual, but is not operating optimally, please refer to the troubleshooting guide below.
During the summer months, avoid prolonged exposure to direct sunlight by removing your unit from the dash when your vehicle is parked for an extended period of time. Do not
spray water, cleaners, or polishes directly onto the unit. The spray may penetrate through the openings and damage the unit. Also, do not use any abrasive cleaners on the units exterior.
Your Whistler detector detects the Safety Warning System.In communities where transmitters are located, this provides advanced warning of various road hazards
including accident sites, highway construction, emergency vehicles, etc. and enables you to respond more appropriately to potentially dangerous conditions.
The Vehicle Battery Saver Mode automatically shuts off your detector after 6 hours if you forget to turn it off. The timer is reset if the detector is turned off, unplugged or
any button is pressed before the time has expired. The detector will alert you with an audible and visual warning before it shuts off
