subject: Mil-std-130 More Than Just Alphabet Soup [print this page] MIL-STD-130 is a DoD (Department of Defense) required standard for virtually every item which must be UID (Unique Identifier) certified. Mil spec 130 will require you to become experienced in all tagging and reading technology. This standard can be incorporated with many already present processes. The Mil spec 130 system originated in the 1960s and has observed only modest revisions within the intervening years, largely to incorporate new categories. This process is most often observed in DOD UID labels, that have since turn out to be both equally a military and private standard. In 2005, a barcode method was also included, in order to assist in faster supply and procurement techniques. The MIL-STD-130 specification has stated the fact that UID tagging from the items must be permanent for the purposeful lifetime of the item.
Mil spec 130 identifies the important points in the tagging specifications, and references a number of other company and federal government documents. Providers to the Department of Defense must adhere to these references, but should be aware that the MIL-STD-130 continually demands precedence over every other record when there is a problem involving the two. The Mil spec 130 specifies that tag words may be used when other approaches are not accessible. As the UID in the product is an internationally distinctive identification and carry out an important role in product management, it is crucial to enter precise marking for the items.
A UID scanner has simplified compliance with MIL-STD-130 using point and scan cutting technology. UID can and does involve a lot of direct part marking (DPM). UID scanners can simplify compliance with the DOD's marking standards. It is important to make sure the identification tag, band, label or plastic identification plate is securely attached to the item.
