subject: Ways to fix Panasonic Computer Black Screen [print this page] Ways to fix Panasonic Computer Black Screen
When your Panasonic computer does not expose anything on the monitor you have a black screen or no display or blank display issue. This can be provoked by any of the following reason: System RAM problem, AGP/PCI-e connector problem, video card problem, Losse VGA/DVI cable connection or Monitor or system has no power.
The cause of black screen error in Panasonic computer and ways to fix black screen error is discussed under the following headings.
- Black screen error because of RAM, video card and monitor
- Black screen errors because of no connection
- Tips on how iYogi can help
- Black screen error because of RAM, video card and monitor
Panasonic Computer Black Screen issue can be provoked by the system RAM. When your system RAM is damaged or is not perfectly installed in the memory slot of the motherboard. The computer may not boot. You can attempt to reinstate the RAM or change it if it is damaged.
After checking that the monitor is running properly, the next way is to verify the video card. Shut down your Panasonic computer and turn off power codes. Restart your system and attempt to reinstate the video card. After instating the video card, turn on the computer to verify if this fixes the issue. If this does not fix the issue try to replace the video card. After changing the video card, if you still sense the issue, your computer board or agp/pci-e attach might be provoking this issue. You fix this by replacing your motherboard.
After verifying if the computer and monitor have power and you still face the black screen problem, try to exchange the monitors with another system to test if the monitor is damaged or not. You can also attempt to reinstate the VGA code of the video card to the VGA port to check if the attach is not connected properly or maybe the VGA code of your display is damaged.
Black screen errors because of no connection
If the computer powers up when holding the button, if not verify the code attachments and the plugs. Then verify if the monitor powers up when you hold the button. If not, verify all codes and the source of the power for the monitor.
