subject: Use of An Electronic Cigarette [print this page] Use of An Electronic Cigarette Use of An Electronic Cigarette
Electronic cigarettes are really quite simple to use; although they certainly function a bit differently than traditional tobacco cigarettes, there's no question that anyone can get up and running with a brand new e-cig in minutes. In this article, one will discover how to get started immediately.
Gathering the required parts
You have to unwrap all the pieces inside the box to get started. The majority of electronic cigarettes come with a battery charger, so you can get started right off. The 3 main pieces you should get together are one battery, one atomizer, and one cartridge. These should be easy to find. You can identify the battery by its length and the presence of a LED on its tip. The atomizer is probably the smallest item in the box with a small braided metallic thing sticking out of one end of it. Actually, the cartridge is nearly the size of the filter for a regular tobacco smoke and has the nicotine formula. There is a foil covering on some cartridges, while other cartridges contain a plastic cap or don't have anything at all on the end. The cover has to be removed before assembly, so go ahead and do that.
Putting together the electronic cigarette
Putting the electronic cigarette together is quite simple once you have amassed all of the components. An atomizer normally attaches to one end of the battery, so go on and do this. With most brands, all you need to do is slide the open end of the cartridge over the tip of the metal-braided end of the atomizer.
Try it out
What you do after this is based on if you have an automatic or manual battery. If your model has an automatic battery, lift the cartridge end of the electronic cigarette to your mouth and take a light pull. When you have a manual battery, the only thing different that you need to do is to press the button on the battery while you inhale. If you do this before a mirror, you can see if the LED at the end of the battery is coming on. If not, the battery has likely died and will need to be charged.
If the LED is lighting up but you aren't receiving any vapor, inhale on it for a few seconds, wait, then inhale again. As it might take a while for the nicotine solution to work its way up into the atomizer, you may find that you need to repeat this process 5 - 10 times.
If you've done this for a bit and still aren't getting any vapor, try hitting a little bit harder, although you shouldn't have to hit any harder than a traditional smoke at any point.
You should receive enough vapor product at this moment. New atomizers usually require one or two days to actually start working the way they are supposed to, and some have an odd taste in the beginning. This is typical, and usually only lasts for a day or so.
If you are not producing any vapor, take the cartridge off the atomizer. Is the wick moist? It should have some nicotine solution on it. It is is wet and you don't have a vapor, your atomizer might be dead. But, it if isn't wet, your nicotine formula may not be receiving the atomizer like it is supposed to.
A small fabric ball that is near the size of a q-tip is located inside the cartridge that you can check with tweezers. The nicotine solution should moisten the fabric. Otherwise the cartridge is exhausted.
If everything checks out, and there is still no vapor, then you will need to phone the place you bought it from and have it replaced.
