subject: Steps to Connect an Engine Analyzer Rightly [print this page] Steps to Connect an Engine Analyzer Rightly
If you have a vehicle, it will be a good idea to own an engine analyzer because this init is designed to help you in communicating your auto with onboard computer. It is also known as a "trouble code reader" and it is able to display a code that, when referenced, will tell you what the problem is. In fact, the use of this unit is really great so it is important for you to have it. In this case, you need to know on how to connect it that will be great for you. For more information, just check this article out.
The first step you need to consider is to put the vehicle's plug-in. In this case, you must know that there is a "D"-shaped socket attached to the bottom of the dashboard of your car which is located under the steering wheel. Thus, you need to be sure that you do it very well. The next process you must do is to insert the connector into the plug and turn the analyzer on so you can be sure that it will work well for your needs. Just be sure that you do this process rightly so you can ensure that it can do the functions very well.
The third step you must do is to put the key in the ignition and turn the ignition switch to the "on" position. After performing this way, it is an important thing for you not to start the engine of your vehicle because it will be dangerous for you. For the next step, you must wait for three minutes until this unit displays the trouble code. In this case, you must look the code that is supplied with the code reader so you will know what kind of thing that happens into your car.
