subject: Fluid Leak In 2010 China's Demand For A Comprehensive Analysis Of Market Products [print this page] At present, our agriculture, water conservancy, energy, transportation, information, construction, environmental protection and other industries developed rapidly, which requires a lot of machinery and equipment to meet their development needs. With the higher level of industrialization and automation, the equipment required supporting a large number of high-performance and high reliability of hydraulic and pneumatic seals. Preliminary estimates, by 2010 domestic hydraulic, hydraulic, pneumatic and sealing products total demand will be 20 billion yuan in 2005 (of which about 900 million U.S. dollars of imports and exports nearly 300 million U.S. dollars) to about 350 billion (of which about 1.5 billion U.S. dollars of imports and exports about 5 billion U.S. dollars). Among them, the hydraulic products from 100 billion to 200 billion, hydraulic products from 10 billion to 20 billion, pneumatic products from 30 billion to more than 50 million products from more than 30 million sealed increased to 7.0 billion yuan.
Agricultural machinery
According to the expected large and medium horsepower tractors 2010, annual demand is about 10 million units, combine 5 million, other types of agricultural machinery have also been increasing, by 2010, medium and large horsepower tractors has about 130 million units, combines about 40 million units. Movement of 2003, industry sales, according to statistics, OEM hydraulic products for the agricultural package of total sales accounted for 4.9% of hydraulic (retail parts were not included). Therefore, agricultural facilities, maintenance, hydraulic and pneumatic seals market demand will increase significantly.
Agricultural products require a lot of gear pumps, piston pumps, multi-valve, cylinder and so on.
Construction Machinery
Construction Machinery is the largest user of hydraulic products, accounting for 42.3% of industry sales, the ratio will continue to expand in the future, so crucial to the development trend of engineering machinery. It is estimated that by 2010 demand for hydraulic excavators about 60,000 years to 8 million units, bulldozers (120 horsepower) nearly ten thousand units, approximately 100 000 Loader 12 million units, the ground plane was about 2,000, about 1.5 roller million, about 2 million units of cranes, forklifts about 8 million units, nearly ten thousand units of cement mixer. In addition, China now has about 140 million units of construction machinery is expected to reach 200 million units in 2010. In another development, the annual domestic production of excavators, road machinery, cement mixer, and assorted imported hydraulic parts, about 1.5 billion USD. In short, for construction machinery, maintenance and use of hydraulic and seals the market will face a new period of great development.
These projects require a large number of high-performance mechanical products, long-life high-pressure piston pump, high pressure gear pumps, high torque motors, wheel motors, multi-valve, fuel tanks, steering and so on.
Metallurgical and mining equipment
It is understood, metallurgy equipment hydraulic and pneumatic technology usage reached 6.1% ~ 8.1%, accounting for 10% of the total cost of equipment around. Statistical analysis from the industry, hydraulic, pneumatic products for the metallurgical industry accounted for directly supporting sales 14.5% and 9% (excluding the retail part). It is reported that annual imports of metallurgical industry for the repair of hydraulic, pneumatic and sealing products to tens of millions of dollars. Therefore, metallurgy, mining equipment, OE and repair of hydraulic pneumatic seals demand will grow significantly.
Metallurgical and mining equipment will need a lot of piston, valve, solenoid valves, proportional valves, servo valves, cylinders, complete hydraulic system, pneumatic components and a large number of seals.
Machine tool
As the manufacturing technology, domestic high-precision, high efficiency, automatic machine tools, especially the increasing demand for CNC machine tools. According to estimates by 2010 the annual demand for CNC machine tools in China more than 5 million units; machine total ownership from the current 300 million in 2010 to 400 million units. In addition, the development of forging machinery and complete systems on hydraulic components new demands. Therefore, machine tools and forging machinery, maintenance and use of hydraulic, pneumatic and sealing parts of the market demand will increase significantly.
