subject: How To Maintain One Machine To Extend The Life Cycle And Improve The Print Quality - One Machine, [print this page] Regular maintenance to ensure the normal use of multi-functional integrated device. The following easy-to-use solutions to help prevent problems and to ensure that equipment is always at its best.
One machine clean If you have one to print, scan, copy or fax equipment service integration, we must always check to see whether it needs cleaning. For example, if there is found to ink, dust or dirt, or dirt appeared on the document or ink marks, which indicates that the cleaning equipment was.
Scanner Clean If the production copy of the outgoing fax or scan articles appeared in black or white lines, that description should be cleaned and re-calibrate the scanner.
To clean the scanner channel, follow these steps:
Disconnect the power supply equipment. Open the document access door. If the white strip (located inside of the door to access the document) piles of dirt, use a clean dry cotton swab. If there is still a long article on dirt or debris, use a cotton swab dampened with a small amount of isopropyl alcohol gently clean the white strip. (If you use alcohol, only a very small amount of alcohol use. Alcohol drip to the device's internal components may damage the equipment.)
If the long white strip of stained glass across the dirt, please use a dry cotton swab to clean. If the glass is still a long article on the dirt or debris, use a cotton swab dampened with a small amount of isopropyl alcohol gently clean the glass strip.
Check scanner within the each roller is stained dirt or debris. Use a small amount of water in non-stained cloth (such as lens tissue) Clean dirty roller.
Check the presser foot and the plate is stained with dirt or debris. If the presser foot and the plate is not clean, use lint-free cloth dampened with a small amount of water in the washing.
Use of dry lint-free cloth, completely clear the horizontal roller, pressure plate on the foot and the remnants of dirt.
Be closed after the water completely dry track document access door.
Printers Clean General, inkjet printers for one machine only for very small component maintenance. But regular cleaning can keep beautify their appearance and to prevent future print issue. Cleaned after each replacement printer cartridge shell. Use a damp cloth to wipe, and be careful not to let water vapor into the inside of the printer. If necessary, use a soft brush or a computer vacuum cleaner down inside the paper path clear debris and dust.
Accumulated in the majority of inkjet printer ink stains within a normal phenomenon, no clear (alcohol or roller cleaners may damage the printer). In addition, the print cartridges move the metal rod at its top, please do not use lubricant. Move back and forth stand the noise also is normal.
Cleaning cartridge Clean inkjet print cartridge itself can correct the deficiency or absence of points of lines, and can eliminate the paper on the streak, to improve printer performance. To clean the print cartridge, follow these steps:
1, turn on the printer, lift the printer top cover. Moving to the printer in the printer cartridge after the center, aside from the back of the printer under the power cable. Remove the cartridge and placed on its side on paper.
2, moisten a clean cotton swab, and then squeeze out excess water.
3, carrying a black print cartridge, so that the nozzle plate for the top.
4, using cotton swabs and clean the surface of the edge of the print cartridges. Do not wipe the nozzle plate.
Check whether there are residual ink on the debris. To check, please get the lights near the ink cartridges and tilt angle. If there is dust, dirt, or fibers, repeat steps 3 and 4, will be cleaned of these residues.
Repeat steps 1 through 4, complete the color print cartridge cleaning. Clean each cartridge, be sure to use a new swab to avoid contamination between cartridges.
Re-install the print cartridges, then close the printer top cover. Connect the power cable, then the test page printed, in order to ensure that the equipment is running properly.
To avoid ink lines, it is necessary to clean the two ink cartridges. Please note that cartridges do not buy more than 30 minutes outside of time, otherwise the print head will be dry, the ink is not available.
Cartridge calibration Color printer only uses black ink, color ink cartridge is also used. Must constantly adjust for these cartridges, the printer will be in the line of text or graphics side by side within the proper drip Ink . For the following, please use the printer utility to calibrate the print cartridges.
Print output in black ink and color ink mixed with each other.
Block print output in color and black small gap between the contour lines.
Remove or replace the print cartridges.
Re-calibration on the accuracy of the scanner, please read the user manual for instructions. On the clean one machine for more information, please read the User's Guide. For more tips and tricks related to the printer, please read the printer optimization; to take greater advantage of one of the scanning machine, please read the scanner to maintain.
