subject: Incorrect Use Of A Metal Hole Saw Is Asking For Trouble [print this page] Incorrect Use Of A Metal Hole Saw Is Asking For Trouble
While it is a noble enterprise to attempt to perform your own DIY repairs in the home, it should be remembered that larger tasks must not be attempted and should instead be left to professionals. This is because a simple mistake could lead to a lot of damage. Using tools which are unfamiliar to you such as an annular cutter could be downright dangerous if you have not taken the time to do some research and find out the correct method of using it. A poor DIY job could end up costing you more in the long run as a professional is eventually needed and must clean up your mess before they proceed. This is not to say that DIY jobs should not be undertaken. If done correctly, they will be as rewarding as anything you have ever done.Perhaps you are looking to install something in the home but you need to create a hole in the middle of a solid surface. Those unused to DIY tasks may consider this to be an impossible task when it is in fact anything but. A metal hole saw can be used for this job but they should be used with caution. It is possible to cut a perfect hole in just about any surface thanks to the range of saws available. For example, if you believe that cutting a hole in a concrete surface cannot be done, think again. There is a concrete hole saw specifically for this job.In general, you are looking at two distinct types of metal hole saw that are regularly used. Blade tipped saws are the most popular and glide through metal and wooden surfaces like a knife through butter. There are also saws that come with diamond tipped edges and these cut through solid surfaces at a slightly faster rate than their blade tipped counterparts. However, the difference in price between them is so vast that it is really not worth paying the extra amount unless you are a professional. Although the metal hole saw may seem like some exotic tool, it actually does not vary from the a regular drill in the way it works. The circular cap is just a drill bit of a different shape which is kept in place by a pilot bit. An arbor is then used to attach the circular blade to the drill. This ensures that the cutter does not slide out of place and is safe to use when cutting through surfaces. Inexperienced DIY enthusiasts may accidentally use the saw without either the arbor or pilot bit which is inadvisable. Using the saw without these safety elements is likely to lead to serious injury.A metal hole saw is the ideal tool for drilling into doorknobs to install locks and is capable of cutting through even the most durable metal. This type of saw is an instrument that can be used creatively in the right hands but could cause damage to property and the person holding it if used incorrectly.
