subject: Different Methods of Carpet Cleaning [print this page] Different Methods of Carpet Cleaning Different Methods of Carpet Cleaning
The procedures used to clean carpets alter due to the adaptation of different methods. A broad array of tools exist in order to assist someone in carpet cleaning - cleaners, powders, liquid, sanitizers, concentrates, deodorizers, etc. Knowing the assignment of the cleaning task is essential when it comes to selecting the faithful products for a certain purpose. It is only by really cleaning carpets that an individual is able to find out the various customer related problems such as drying time and carpets not appearing as clean as clients expected.
It is very noteworthy that the carpet cleaning method that one chooses should be according to the category of carpet one possesses. There are various types of carpets out there as there are various kinds of carpet cleaning methods, several of which do not work on certain carpet types. absolutely, they may even end up damaging them. thus, the first step towards selecting a carpet cleaning procedure is to find the carpet type that is required to be cleaned.
Foam Cleaning Method
If someone has old carpets, then this is the ideal carpet cleaning procedure they should go for. Due to its low pressure and gently executed cleaning method, it doesn't run the risk of ruining the carpets. In order to clean these carpets, one has to spray a certain category of foam chemical on the carpet surface, wait for an hour to let it dry, and then vacuum up. The only drawback of this method is it does not get all the stains out.
Rotary Method
This technique requires the use of a single-disc rotary floor machine. The rotary brush inserts cleaner into the carpet from a tank on the machine. In this manner, by using a wet vacuum, the dirty solution gets removed. By applying this method, one should be efficient to clean by agitating the carpet surface. The extraction and rotary techniques are both really capable; the combination is most effective while removing heavy soil, although this requires good hand ability in order to anticipate wetting. A wet vacuum and a floor machine are needed for this job. The only downside to this procedure is that the carpet must be done in 4 X 4 feet areas or else the wet vacuum will be inattentive in extracting proper material.
Dry Powder Method
It is a really new technique. Here, the dry absorbent material is impregnated with dry-cleaning solvents. After this, a fair amount of detergents is sprinkled onto the carpet and scrubbed with rotary brushes. The powder holds dirt in suspension and is dry-vacuumed away. There are no risks of water damage. Anybody can walk on the carpet promptly after cleaning as there is no drying required. The powder can be applied as an absorbent instantly after a spill. However, this method is not useful on heavy soiling. It is not easy to remove the powder entirely and in fact it can stay on in the carpet and resoil it. Also, the kind of brushes used on the carpet can destroy the delicate fibers of the more expensive materials.
