subject: Tools For A Spot Welder In Production Projects [print this page] Modern Welding Methodology Modern Welding Methodology
A spot welder works via an electricity to form a connection between two metal sheets. The whole perception is based around the specific "spot" or centralized area where the weld is produced. An electrical current is fed through two electrodes and into a very minute part on two pieces of metal. The pieces of metal are fastened mutually. When the current is functioned in one particular "spot" it melts the metal and forces the two sheets to tie in that spot.
Spot welding is a business using a definite type of spot welding tool which allows those experienced with it to connect two pieces of metal together so that when it cools, they will be connected eternally, making a stronger and superior formation. There are number of different tools used when spot welding, helping people to do a better occupation, as well as keeping them safe throughout the process.
About Spot Welders
The main device when spot welding is the welder itself. These welders come in special shapes and sizes, ranging from smaller welders with heating elements which can only melt certain types of metals and other materials, to heavy duty spot welders which can melt just about any type of metal used in construction. Special amounts of knowledge and proficiency sets are needed to spot weld with these different kinds of spot welders, so make sure you know with what you are going to work and that you are experienced at working with it before you try it on a production development.
Protection Mask
It is significant for spot welders to always put on a mask while they are welding for security purposes. The sparks produced by spot welding can burst up and burn parts of a spot welder's face and neckline, so it is important that these masks, made out of thicker pieces of metal or plastic, face these areas. The area where spot welders wearing the mask can see through should also be in the shade like - sunglasses with polarizing lenses, so that the dazzling light from the spot welding doesn't harm the irises of the spot welder's eyes.
Gas Tank Accessory
Spot welding uses gas for fuel and these tanks are associated with hoses to the spot welding equipment itself, allowing gas to be lit and liquefy the metal that is being combined simultaneously. These gas tanks come in a range of sizes based on the quantity of spot welding which is being done on a job and they include nitrogen and oxygen, which will burn hotter than gases like butane or propane. It is essential to turn off the gas from the tank every time when you are finished spot welding, so that it doesn't pour out and cause a likely outburst.
