subject: Four simple steps to extend UPS battery life [print this page] Four simple steps to extend UPS battery life
Uninterruptible power supply (UPS) usually use 3-5 years. Life expectancy depends on many factors, including the use of (the equipment must be the battery model number) and other environmental factors. Here are some of your equipment to ensure the best use of the principle of life expectancy:
1. To ensure that your APC UPS asus a32 f3 battery Store in a cool, dry place. Ideally, UPS by placing the temperature should not exceed 24 degrees Celsius. Meanwhile, for ventilation, leave a reasonable amount of each side about 1-2 inches of space, convenient for airflow.
2. Each year, only if necessary for 1-2 hours of calibration UPS run time. Sometimes, you can calibrate performance to see if your execution time is sufficient. However, the implementation of common run-time calibration asus f3 battery will reduce the life expectancy of the battery APC.
3. Do not store the battery long time CPA. The new battery can be stored for 6-12 months. After this time, you must use the battery as soon as possible, otherwise they lose their storage capacity. Do not recommend storing
4. Load does not exceed the rated capacity of the UPS equipment 80%, as this would result in reduced performance. Load increases, the duration will be reduced accordingly.If power can not provide full load of the inverter will soon run out and the release of its battery charged, which will reduce the life expectancy of your battery. Note: In order to increase execution time, only the laser printer asus z96 battery connected to the outlet of the UPS battery backup. To ensure that laser printers use the "Surge only" outlet (using the model). For those who are not "cons Surge only" outlet of the UPS, the proposed laser printer connected to a suppressor APC Surge distinct.
