subject: How To Choose The Whole Cabinet Gas Stove - Gas Stoves, Gas Stoves Embedded - Embedded Appliance [print this page] , gas stoves because of their simple, bright, high-grade, easy to clean, more by consumers. Resolve their way of secondary air required for combustion, embedded gas stove can be divided into "under the inlet," "motivated Wind", "backward wind" of three.
Now embedded glass Panel Gas stoves are mostly the first two forms, if the product quality or improper installation, but related, are prone to incomplete combustion, CO exceeded, yellow flame, shell and panel temperatures are high, not fierce fire, the glass exploded and so on. So consumers must be of good reputation the city shopping malls or building materials products.
Involved in every household use of gas stoves, use of high frequency, it is also particularly high security requirements, quality cooker eligibility, will directly affect the lives and property of consumers. According to national standards, gas stove must meet two requirements: 1, under the lights the fire, the release of carbon monoxide in the flue gas concentration should be less than 0.05%; 2, gas cooker flame failure protection devices must be installed once the flame, stove in 20-30 seconds cut off of gas source. Poor quality gas cooker can not fully burning, its excessive release of carbon monoxide gas, and the impact on human health, serious cause death.
Choose gas stoves should note the following:
kitchen should be combined with the overall design and use requirements to select different types of stove.
gas stove though low-tech product, but it was especially high security requirements, so be sure to choose a professional production of large-scale manufacturer of products that can guarantee zero
Fitting The self-produced more than 99%.
desktop gas stove ignition system, the most critical component is ignition, ignition strong, crisp voice of the ignition device to ensure the gas stove ignition success rate and service life.
Table gas stove combustion system is the most critical components and sub-burner firearms, anti-rust treatment after forging brass burners and firearms can ensure that the sub-combustion thermal efficiency and long life.
No matter what products should be used with flame failure protection products, can play a role in accidental turn off automatically expire, flame sensor and thermocouple protect ion in two ways, one way of response to fast ion sensor .
gas stove looks to be beautiful, no collisions throughout the body, some with cast iron, steel products and other materials should be uniform and smooth surface of paint, no blistering or loss phenomenon. The overall structure of the gas stove should be stable and reliable, kitchen surfaces should be smooth, no warping, and parts of the installation should be strong, can not have loosening.
gas stove knob, nozzle and ignition of the installation location must be accurate, ventilation ignition, each ignition gas could ignite a fire should be the basic (start 10 times at least 8 times to ignite the flame), 4 seconds after ignition, the flame should be spread over all the fire Confucius. Use
Electronic Igniter for ignition, the human body in contact with the stove should be no metal parts, electric shock feeling. Should be uniform and stable flame was green blue, no yellow fire, and fire behavior.
for ignition tests, Gas stoves should also check the way the tune is convenient adjustment damper, pot support the appropriateness of such installation.
see whether affixed to permit gas stove
Sell
Logo, is there evidence, instructions and technical parameters marked evidence.
