subject: "setting Standards For Fire Safety Evacuation Signs" - Evacuation Signs, Set Standards, [print this page] 1 General Provisions 1.0.1 In order to set reasonable fire evacuation signs, to protect personal safety, reduce fire hazards and facilitate the rescue, the development of this standard.
1.0.2 This standard applies to new construction, renovation, expansion of civil air defense projects and the people of both peacetime and wartime fire evacuation signs in the design, construction, inspection and maintenance.
1.0.3 Fire safety evacuation sign design and construction should conform to relevant state policies and the construction and quality control regulations, be safe to apply advanced technology and economic rationality.
1.0.4 Design fire evacuation signs selected products subject to national quality supervision and inspection of fire testing center Certified.
1.0.5 Fire safety evacuation sign design and construction, inspection and maintenance shall meet the standard requirements, there should be consistent with current national standards and norms of other relevant requirements.
2 terms 2.0.1 fire safety evacuation signs Fire safety evacuation sign
For fire evacuation instructions when the role of signs.
Used to indicate the direction and evacuation (or) location, evacuation signs guide the general direction of the evacuation channel signs, evacuation signs exit signs or both of the composition.
An evacuation signs, evacuation of personnel to maintain the visual connection and guide staff toward exits and exit signs for evacuation.
2.0.4 warning signs Prohibiting and inducing or warning sign
Warnings and evacuation of personnel to take appropriate actions evacuation signs.
2.0.5-type electric light fire evacuation signs Electricity luminglighting fire safetyevacuation sign
Way through the power of field emission display light fire evacuation signs.
2.0.6 Luminescence-based fire safety evacuation signs Light-cumulating fire evacuationindicator sign
By light exposure, and even after the light source away from the light within the specified time the fire evacuation signs.
3 set requirements 3.1 General provisions 3.1.1 Fire safety evacuation Signs should be based on building use, building size, use of personnel characteristics and environmental factors such as indoor use.
3.1.2 set up fire evacuation signs, the sign content should be clear, concise, clear, and with the content to be consistent with the expression should not be conflicting or duplicate.
3.1.3 fire safety evacuation signs should be located prominently and should not be set in the often obscured position (except as otherwise provided in this standard), exits, exit signs and other evacuation should not be set to open door, window sash or other moveable objects.
3.1.4 when the normal lighting power failure, should be able to automatically switch 5s Emergency lighting Power, and the surface marks the lowest average intensity and uniformity of illumination shall comply with the requirements of everyday situations.
3.1.5 evacuation diversion signs should be along the evacuation routes and exit or exits leading to the design of route settings.
3.1.6 in the joint setting type and light storage type electric light and other types of fire safety evacuation sign systems, light storage type and other types of fire safety evacuation signs suitably used in the supplementary.
