subject: Indoor Waterfall – How to Care and Maintain the Water Pump [print this page] Indoor Waterfall How to Care and Maintain the Water Pump
Regular care and maintenance of the indoor waterfall is quick and in most cases requires an occasional wiping of the unit completely with a cloth to protect the unit from dust particles and weather damage. While this may be the case for the waterfall unit, the pump requires a more rigid maintenance and care. Check the water in the pump constantly making sure that the pump is submerged in right amounts of water. Evaporation as well as high humidity are two factors that rapidly drain the water in the pump. Fill up the water level regularly to prevent this problem and to ensure that the pump is working efficiently.
Problems with the water pump can be minimized as long as the water level in the basin is full. Otherwise, if you continue to encounter problems with the water pump, disassembling it might just do the trick. The main cause of many problems in water pumps not working properly is that a fair amount of debris and dust particles may have gathered on the surface and lodged in the water. Covering the tube with a soft fabric similar to pantyhose will sift the particles from gathering into the pump.
Never attempt at repairing the water pump while the unit is running, doing so exposes you to electrical shock and potentially damage your waterfall.
Clean and completely drain the water in your waterfall every four to six a few months. Manufacturers recommend using mineral water instead of tap water. Mineral deposits contained in tap water can encourage clogging of your fountain and will affect the pump's ability to do the job properly. Water treatments in between cleanings will also ensure that the water is free of algae and other particles that can cause the pump to work properly. There are products available in the market made especially for treating the water in your pump.
Fountec is an EPA registered and is very effective in the prevention of algae without harming the earth and animals. It is also heat, sunlight, and evaporation proof. Use a small dose of Fountec because it is highly concentrated. When used correctly, Fountec can last for several months.
Protec is another product used to maintain the beauty of your water feature surfaces. It contains a mixture of advanced organophosphate, protecting against white calcium mineral buildup and metallic stains. One dose can last up to a thirty days or longer.
Following most of these simple maintenance and good care guidelines guarantee long enjoyment of your indoor waterfall.
