subject: Aluminium Wire and its Advantages [print this page] Aluminium Wire and its Advantages Aluminium Wire and its Advantages
Aluminium wire
Aluminium wire was used widely from the mid 1960s to late 1970. However, after 1980 it has become rare to find aluminum wire in houses. Aluminium wire can be identified by its silver or aluminium color. The best way to identifyaluminium wire is to check inside the electrical panel box. Aluminium wire is labeled on the exterior of the coated wire. Usually, the words alum or aluminum is stamped on the exterior wire covering. Sometimes it is difficult to determine copper wire, and then the best way is to check into the main panel box.
Usage of Indian aluminium wire
Aluminium wire was manufactured as a substitute to traditional copper wire as it is relatively cheaper. During 1970s aluminium wiring became very popular and was extensively used. Although the jurisdiction did not permit the usage of aluminium wire in new construction, lot of aluminium wire is still used in North America. The larger sizes of aluminium wire offer an excellent option for termination as the most common termination in larger sizes is made of an aluminium alloy. In addition properly terminated wire is regarded safe as long term installation have proven its reliability. Also, aluminium wire is used in residential applications for service entrance and for large branch circuit loads such as air conditioning units and ranges.
Moreover, utility companies have been using aluminium wire since 1990s for transmission of electricity within the power grids. It has several advantages over traditional copper wire as it is flexible, lighter and less expensive. The application of aluminium wire in power grid was very successful and is still used today.
Aluminium is also used in many appliances. It is known to have good corrosion resistance which helps in securing longer life for all the appliances made of aluminium wire. Also, aluminium provides effective and cost efficient solution as conductivity per ton of aluminium wire is much higher than other wire materials which are used today.
Furthermore, hydro aluminium wires are available for high, medium and low voltage applications. It is designed in various shapes as per the requirements of the customers.
Additionally, pure aluminium is ductile, corrosion resistant, and soft and has a high electrical conductivity. It is therefore used in making foil and conductor cables, but alloying it with other alloy is necessary to provide higher strength that is required for other application. Typically alloying elements are zinc, copper, manganese and magnesium. There are two main classification of aluminium alloy- casting alloys and wrought alloys. Almost, 85% of aluminium is used for making wrought products like foil, rolled plate and extrusions. Caste aluminium alloys help in producing cost effective products due to low melting point. Also, aluminium alloys are used in engineering structures and components where corrosion resistance or light weight is used.
Indian aluminium wire
There are many Indian aluminium wire supplier and host number of aluminium wire exporter. These Indian aluminium wire supplier and aluminium wire exporter manufactures a wide range of aluminium wire products, bare alloy wire product rivet, rod and fastener wire, screw machine stock, custom drawn tolerance round wire and painted aluminium spikes and nails. These Indian aluminium wire products are manufactured in alloys and surface finishes. Etched, oil and shaved finishes are offered to meet the customer's requirements.
