subject: Coated Glass Production Methods And The Thickness Of The Original Film [print this page] Production of raw glass present, there are two kinds of arguments on the law and the float. Cited the law is quoted directly from the molten glass on a slow cooling in the form of ordinary glass, the surface roughness is low. Float glass is the more advanced production technology, the glass is melted in the tin floating bed by gravity and surface tension to form a smooth surface, its surface smooth and clean good quality,Zirconia supplier, no ripples, do not walk like, so the choice of plating The original piece of glass membrane must be the production of a float glass products, and in the appearance of quality consistent with existing national standards GB11614 requirements. Coated glass and the freshness of the original glass of the time not more than a week,optical coating, or film affect the functions of the firm with poor results. While the original film thickness can not be free to choose,zirconia properties, and role must be the effect of wind load combinations, the calculation and checking confirmation, or easy to have broken and destroyed. Such as the Boston John Hancock Building 60 layer, 70 in the summer of the 20th century under a severe wind damage, broken to the 100 from the local crack, and finally had to replace the 10,348 glass.
January 17, 1995, earthquake in Kobe, Japan, a lot of damage to walls, broken glass flying caused great casualties. China also has a similar incident Kun District, Baotou City, Inner Mongolia,Zirconia, such as Hardware stores hidden frame glass curtain wall completed in less than two months, hundreds of pieces of glass all broken. Must therefore be carefully chosen in the original film coated glass production methods and thickness.
