subject: How to Boost a Router Signal [print this page] How to Boost a Router Signal How to Boost a Router Signal
Basically routers haves the ability to transmit strong signals; these signals are powerful but because of some interference by physical materials, or because of some other signal drift around the air, or because you forget to plug the cable it may show some problem.
Whatever is the issue there are some certified ways to try to overcome this situation of a weak router signal. Some problem can be easily solved by applying common sense, while other needs some technical solution.
Some instruction to increase the signal of a router
Try to place your router in a better place. You can place your router in an open position where it is not interfered by thick or metallic materials such as brick walls or file cabinets. Other objects that can block the signals are garage door openers, cordless phones, baby monitors and microwave ovens. Tip behind this is that less obstrucles in the signal path, the faster it is for it to transmit information to your computer.
Normally, routers send their signals on a radio frequency of 2.4 GHz. Many household things may work on or around the similar frequency. This will result in the bogged down of the channel with enough traffic and slow down the connection. To avoid this you can change the channel. With the help of some networking tools you can easily do this job.
You can update firmware or drivers to increase the signal strength of your router. Your computers network adapter or router firmware are made to attach bugs, smoothen out reliability and performance, and to add new features. So it's better to update firmware or drivers.
Try to use things such as router and adapter form the same company. Compatibility plays a big role to increase the signals, especially for two way transmission. Some companies provide accessories which help to improve the signal strength or speed. This only work good if everything belong to the same brand.
Replacing the antenna produce some results. An omnidirectional antenna is connected with most routers. This helps the router to transmit signal proportionally within a particular radius. So it's better to place your router in a central area. You can install a high gain antenna to direct the signal in one common direction.
Replacing the adapter of the wireless will produce some result. The wireless activity is a two way process, the problem may not be because of the router, but really the wireless adapter connected to your computer. If your computer is not able to resend signals, the same problem will arise.
You can add an extra wireless Access point or repeater to increase the signal. Adding an extra WAP need the capacity to feed an Ethernet cable from your first router to the new accessible point. You can configure as repeater, clients, bridges or gateways. The reason behind this is that WAP is an extension of the main hub in order to lengthen the signal. It will work the same manner.
Without upgrading or using hardware application you can improve the data transmission way. The instructions above mentioned are to help to solve the problem of a weak or block signal.
