subject: LCD screen cleaning: The correct cleaning method [print this page] LCD screen cleaning: The correct cleaning method
LCD screen cleaning
Baby was a long time for liquid crystal display, the screen will become a dirty great painted face, how do? The correct cleaning method is to take a soft cloth moistened with a little glass cleaner and carefully wipe off the stain (there is no detergent to water it), wipe the intensity to light, or the display screen will therefore short-circuit damage. In this process, do not let the water flow to the screen frame and the screen interface to avoid short circuit burned out monitor. Do not use a towel to scrub hard surface of the screen, so as not to affect the surface of the screen wipe raising display. Clean the display but also rationing, frequent scrubbing is not right, so will display the same cause some adverse effects. In addition, a number of indelible stain to deal with, I have a secret, with transparent plastic, to the screen one, and then peeled off, the screen is affixed over the place is very clean and grease are stuck to the clear plastic top to go. (For reference only!)Battery Laptop Battery battery
In short, the process of using liquid crystal displays, to doubly care of her, abandoning the original use of CRT monitors Datailielie problems, will be good practice to keep the original. The best use of the recommended resolution, allows the display to achieve the best. If the maintenance of relatively good, an LCD monitor fully able to spend more than ten years. Finally, good maintenance of good hope you can use your LCD monitor to your work and life more fun! Citation: For liquid crystal display of the problem of how to care and maintenance, has been more and more consumers are concerned. In this regard, the reporter interviewed the professional LCD manufacturer LG Electronics, please give us their engineers to provide some good ideas worth learning.
With LCD technology matures, prices gradually civilians, began to step into the ordinary LCD monitors consumption. Now, many people have been upgrading desktop monitors, LCD monitors on the market ownership is rapidly rising. Thus for the liquid crystal display and maintenance of the problem of how to care for, has been more and more consumers are concerned. In this regard, the reporter interviewed the professional LCD manufacturer LG Electronics, please give us their engineers to provide some good ideas worth learning.
Experts recommend one: to maintain dry working environment, avoid contact with chemicals
Should know, water is the natural enemy of the LCD, if the humidity is too large, the internal LCD will be condensation, condensation occurs after the leakage and short circuit, and the LCD screen will become blurred. Do not let the liquid crystal display on the damp places, not to let any thing with the water into the liquid crystal display. If found in the boot just before the fog screen surface, wipe gently with a soft cloth; If moisture has entered the LCD display, you can turn off the monitor, the LCD back to the sun, or baked with a lamp inside the water will evaporate can be. But be careful not to LCD screen facing the sun, it will cause components aging. Experts advise consumers, such as LG and other big international companies have paid great attention to after-sales service, if there is moisture the more serious incidents, the average user and the local brand is best to contact service providers to help them safer. Because more serious moisture damage LCD components, the user will contain a high humidity when the LCD power will cause the LCD electrode corrosion, resulting in permanent damage.
