subject: Lincoln Quicklub lubrication system in the application of Case Cotton Picker - Lincoln, lubrication system, cotton picker - Construction Machinery [print this page] Lincoln Quicklub lubrication system in the application of Case Cotton Picker - Lincoln, lubrication system, cotton picker - Construction Machinery
Lincoln Quicklub lubrication system in the application of Case Cotton Picker
Case 2055,2155,2555 model cotton picker is applied on Lincoln Quicklub lubrication systems, lubrication pumps and SSV from the P203 distribution valve.
A) working principle Lubrication pump is powered, when the cotton picker and the fan is closed starting, lubrication pump to work, go into the high pressure system in grease, and distribution through the valve at various levels will be injected into the grease lubrication points. When the timer set working hours, or the fan switch to off, the pump stopped working. Work in the pump, the oil tank inside the board also began scraping action, scraping down the oil (which can be visual to), the pump stopped, the board stopped the oil scraping action. In addition, the distribution of valves in the first stage is also equipped with a pointer, in the lubrication process, the pointer will be reciprocating telescopic movement, you can visually monitor the operation of the system.
Pump operation, through the high-pressure hose to oil injected into the first-level distributor, the first-class distributor to the next one will be injected into oil distributor, and then Plastic Hose Will be injected into the grease lubrication points. And the distribution valves for fuel injection pump is accomplished by piston movement, so to ensure that all lubrication points are precise amount of grease, lubrication will not be an imbalance.
Distribution valve is used in the working principle of progressive type, the system is reliable. When there is a blockage of lubrication points, the distribution valve to stop action at all levels, a distribution valve pointer also stop the action, which is very easy to detect system failures. If the pointer plus one limit switch, electronic control can be achieved detection system operation.
Lubrication pumps are installed in the outlet valve, when the blockage or when the system pressure is too high, the pressure relief valve started, you can visually to a small amount of oil unloaded from the safety valve out of office, when maintenance personnel need to overhaul the system.
Also can be used with a nozzle of the valve. When the pump fails to stop working while the cotton picker it needs lubrication, the nozzle manually by the system temporary Da You. This will not affect the lubrication pump failure cotton picker operation.
2) Quicklub daily maintenance of the lubrication system
Quicklub system in the design, manufacture, installation to the system to take into account the reliability, so the system is running almost no maintenance. However, to ensure better operation system and parts of the lifespan, it is recommended to do regular maintenance as follows:
1) check the tank oil level, when the oil level is low, catch up on oil.
2) check the safety valve, safety valve Department when there is oil spill, the need to check elimination system clogging.
3) check valves and lubrication points allocated to each of the joint, check for loose or oil spill.
4) Check to see whether the damaged pipeline lubrication.
5) View all lubrication points to see whether the new oil out.
6) Press the button lubrication manual pump up to 2 seconds to see whether the system work. (Only when the cotton picker pulled away, and the fan is closed by pressing this button, the system will move)
7) in the repair process, identified the need for timely repair of any problems.
