subject: How to reduce noise in the home using ceiling tiles [print this page] How to reduce noise in the home using ceiling tiles
The ceiling tile can be used for acoustics and aesthetics. Sometimes the noise levels from upper floors or the surrounding area creates discomfort in the home. In the one storey building, people and equipment are more closer together. This creates a higher level of noise within the home. This can be controlled using ceiling tiles as an acoustic material within the home. This are usually fixed on soft boards, gypsum boards or concrete soffits. These are available in different types and shades.
The ceiling tiles can be fibre, glass, cork or wood. This are usually fixed using nails, staples, clips or adhesives. They can be laid in different patterns. it is important to choose light colors in order to brighten the room. Sometimes instead of demolishing an old ceiling, tiles can be laid over the worn out surface. another important aspect is to follow the manufacturers instruction on additional decorations. Some of the surfaces cannot be painted as they loose the acoustic properties.
The surface preparation involves all corrections on the old ceiling. The surface should be smooth and at least an undercoat painted to it. This ensures a clean environment before laying. In the kitchen, it is preferable to use fasteners instead of the adhesive due to the heat during cooking. safety pins should also be used on the tiles laid with adhesives on ceilings under roofing iron sheets. This again is due to the heat build up on the roof space during the sunny periods of the day.
When using ceiling tiles, ensure that they follow the joists in the original surface. Start by marking out the desired pattern. Begin laying the tiles from the center outwards. This will ensure that the last piece nearer the walls and cornice are equal. This joint will also be covered using the cornice. Purchase the tile boards that are square or rectangular. This are easy to fix and maintain. After laying the tiles clean out the joints and ensure the light fittings are fitted correctly on the new surface.
