loan

subject: Automatic Stretch Pet Blowing Machine [print this page]

Automatic Stretch Pet Blowing Machine
Automatic Stretch Pet Blowing Machine

Automatic Stretch Pet Blowing Machine

All the qualities of PET :

The PET bottle is a great success in many countries. And no wonder, producted by

the biaxially oriented blow moulding process, PET or Polyethylene Terephtalate

bottles combine outstanding performance and aesthetic qualities. These give you

the superb crystal clarity needed to show any product to advantage. They have

excellent carbonation retention properties and good barrier to oxygen. Extremely

resistant to breakage, light to handle and transport and safe to health and

environment.

With Canadian clear system flexibility:

To the advantage of PET itself, the extraordinary characteristics of the SSB 10 to

SSB60 are added: simplicity, compactness, reliability and flexibility.

Quickly installed, the machine is ready for producing bottles of various shapes and

contents as the changes of the moulds are rapid. Renowned for these advantages,

it is the small "two step" machine which is the most sold in the world and gives

satisfaction to hundreds of producers for very different applications:mineral

water, carbonated drinks, edible oil, detergents

This is the ideal system for the economical production, in small series, of quality

bottles.

The Quartz Oven :

Eight vertically, horizontally and angularly adjustable double lamps can be

returned to all a more uniform heating of any type of preforms before

blowing. Preheating is achieved by recirculating hot air exhausted by lamps

and the system automatically adjusts to changes in the ambient

temperature.

An oven with ten lamps (optional) permits the heating of thicker preforms.

The Control Cabinet :

The control cabinet is equipped with a programmable microprocessor with Error

Status indicator. Setting and adjusting of the controls can be performed manually.

For special climates the cabinet can be air conditioned.

Easy Access:

The pneumatic, hydraulic and electrical equipments, as well as the cooling system,

are easily accessible.

Minimum replacement time is required when one type of bottle mould is changed

for another one. No special tools are needed.

The Bi-Axial Orientation:

PET is certainly the ideal material, but to retain that title, it also needs the full

benefits of bi-axial orientation.

Bi-axial orientation requires two stage production. The preform is first produced

and then, within a precise temperature range, it is simultaneously stretched both

axially, (thanks to stretching rods), and radially by blowing. It is this process

which gives the container its strength.

These two phases can be carried out on one double acting machine (one stage) or

separately on two different machines (two stages).

But the new generation of application is covering a still more extensive range :

detergents and cleaning products., wine and other alcoholic drinks, fruit juices,

certain conserves, sauces, ketchup and mustard, cosmetic and pharmaceutical

products, industrial paints and oils, chemical products etc.,

A range of new markets with a promising potential.

Specialized in the manufacture of bi-oriented stretch blow moulding machines for

PET containers (starting from preforms), Canadian Clear is offering today a

completely upgraded range of small and medium capacity blow moulding units.

They combine the proven simplicity and reliability of the linear machine concept

with the most recent developments in the field of PET process technology. A state

of the art, user friendly operator machine interface (graphic display) allows easy

programming of all relevant production parameters, ensuring at the same time

extremely fast product change-over. Special equipment packages are available for

the production of refillable or hot fit PET bottles, PEN/PET bottles and bi-oriented

PP-bottles.

Advantages of a flexible system :

A system of small modular units has many advantages over one large machine.

You can begin small with the minimum investment.

As business grows, additional units can be acquired.

Production volume can easily and economically be adjusted to market fluctuations.

Bottles of different sizes and weights can be produced simultaneously on different units.

Change over from one production to another can be rapidly effected.

The equipment design is simple and, as a result, the tooling costs are low.

The Canadian Clear system is well known for its solidity and reliability according to world standards.

A simple system to operate means short training for operators.

As the machine requires very little maintenance, cost related to non operating machines are negligible.

www.canadianclear.com

welcome to loan (http://www.yloan.com/)