subject: Vortex Tube - A Few Handy Facts Revealed For User Convenience [print this page] Vortex Tube is a handy spot cooling tool that has found its way into the application areas of almost all industry sectors. Though it is used in all segments, yet it is necessary that you know a few facts about this tool to get the maximal benefits as a user.
Connecting Vortex Tube output to an Air Knife:
Though many people are of the opinion that the vortex tube performs great when connected to an air knife, yet it is a myth. Know why? This tube in fact cannot function properly when its cold outlet is subjected to any restrictions that would produce backpressure in excess of 5 PSIG. Hence, connecting to an air knife is not advisable.
Vortex Tube Vs Cabinet Cooler for electrical enclosure cooling:
Though this tube is the advanced form of cabinet coolers, yet for cooling electrical enclosure the latter is of great advantage. This is because only these are UL Listed to maintain the NEMA integrity of electrical panels. Moreover, cabinet coolers are built only for the specific purpose of cooling electrical enclosures and the temperature is maintained along the similar lines. However, these tubes are adjustable and can hence may be susceptible to maladjustments and inefficient operations.
Effect of warm compressed air on a Vortex Tube:
Putting in elevated inlet temperatures into it without doubt has a great effect on the performance of these cooling equipments. It increases both the cold and hot end air temperatures from supply air temperature.
Vortex Tube Vs other cold air products:
The chief difference between this cooling tube and other cold air products like Cabinet Cooler, Cold Gun, Mini Cooler and Component Cooler is that it has a wide range of flow rates for each Tube size as per their application. On the other hand, the latter products mentioned before have only fixed total flow capacity that is ideal for its fixed application area.
Selecting the right Vortex Tube:
These tubes chiefly come in three different sizes with a variety of cooling capacities. You can choose from any one of these. However, if these standard varieties do not serve your requirement then it is best to goo for cooling kits that are readily available in the market and come with a varied range of generators and accessories that can be associated with this compressed air tube to get the best results. This is great for various flows and temperature that you might require for your individual cooling needs.
Remember these guidelines when you get a vortex tube and you can never go wrong.
