subject: Machine For Chewing Gum Removal [print this page] When it comes to cleaning public places like parks, huge stadiums and theatres, public transport vehicles, and so on, the most challenging task that concerns the cleaning staff is chewing gum removal. The gum base, which is basically a type of synthetic rubber, sticks to the surface of the floor when dropped. As it dries, it turns into a hard deposit with stubborn adherent properties.
It is literally difficult to remove hardened and decayed chewing gum. The gum residue left behind gravely impairs the beauty of benches, statues and pavements. The solution to this problem is the use of an efficient chewing gum removal machine.
Some of the traditional methods of removing gum wads are scrubbing and use of potent chemicals. However, these techniques have not been fully effective. The whole process of gum removal is slow, painstaking and leaves a lot of mess to clean up. Worse still, they leave behind ugly stain and abrasion marks. The answer lies in todays modern chewing gum removal machine that has been specifically designed for this job.
One such chewing gum removal machine is the Gum Blaster. It is used as an attachment to a hot or cold water pressure washer with a recommended pressure of at least 150 bars to up to 225 bars. The flow rate must be 12 litres per minute or greater.
The Gum Blaster is a widely popular chewing gum removal machine as it is very simple to use. First, position the cleaning head over the chewing gum that needs to be removed. Next, pull the trigger and move the Gum Blaster back and forth over the gum. It is a matter of just a few seconds and the hardened chewing gum wads will simply disappear.
What makes the Gum Blaster effective as a chewing gum removal machine? Well, the answer lies in its innovative design. There are eighteen pressure intensifying needle jets set inside the Gum Blaster at a fixed height and angle which effectively blasts away the gum wads. The unit also houses a special chamber to collect the blasted off gum wads. You can easily empty the chamber and dispose of its contents in a responsible way. So, here is a machine that not only removes the gum, but also collects it at the same time, making the whole cleaning process hassle-free.
The Gum Blaster offers an efficient and reliable solution when it comes to removing chewing gum from public places. It just takes a few seconds to remove a single piece of chewing gum from a hard surface. It may however take a little longer in case of old gum wads. So, if you need quick and effective results, you may rely on this innovative chewing gum removal machine.
The best thing about Gum Blaster is that it can be used (as an attachment) with most hot and cold water pressure washers. Also, there is no need to use any chemicals. Please note that a hot water pressure washer is likely to offer quick and better results.
So, if you are looking for complete and effective removal of chewing gum stains and residue, make sure you consult a reputable company that supplies the Gum Blaster and also a wide range of pressure washers to suit your needs and budget.
