subject: China's First Floor Paving Work Will Be Issued Technical Standards - Refractory Industry [print this page] Flow from the Timber Distribution Association Flooring Committee was informed that "floor coverings technical level working standards" has been drafted by the higher authorities for approval and is expected to implement this year. The implementation of this standard will allow more standardized floor areas in the pavement.
From Timber Circulation Association Floor Circulation Committee was informed that "floor coverings technical level working standards" has been drafted by the higher authorities for approval and is expected to implement this year. The implementation of this standard will allow more standardized floor areas in the pavement. Most work for the floor coverings are "pick up the hammer down hoe," of migrant workers, low educational level, is responsible for the labor department will also not read the pavement, but skillful workers set up a separate examination room, asked people to ghostwriting for the a professional knowledge of its examination.
Floor, according to Timber Distribution Association vice-president of Miss Yang Meixin flow description, "paving the floor level of the standard industrial technology" is not only Guoneishoubu paving workers and Pavement Technology for introduction of standards, but also the first of the international aspects of standard. Floor circulation of this standard-setting committee has already laid the foundation. Since the floor circulation Commission launched in 2001 paved the workers certificates of good practice. Examination of workers through training will be the Ministry of Labour compliance certificates issued divided into beginner, intermediate, advanced three grades.
Ms. Yang said, the work is now mature, the Association will jointly Forestry, the Ministry of Labour and other relevant departments to develop this standard. "Paving the floor level of industrial technology standards" promulgated after the floor coverings employees to be tested before they can posts. Training is divided into two parts, theory and practice, the first timber from the experts and professors teach the basic knowledge, then the basis of pavement technology to teach.
Learned, floor coverings and other industrial technology level examination vocational qualifications in the written part of the difference is to find someone to ghostwriting. The flooring industry initiative aimed at practitioners, mostly from rural areas, low education level. In the premise of ensuring a fair and just, for those not literate, literacy is low, but good workers Pavement Technology will set up a separate examination room, others were written by my oral form of written examination.
"Technical level of the floor paving work standards" are also paving process has been standardized requirements. Ms. Yang, said that consumers can understand the standard by paving the floor of the four important steps. First, test the ground before laying the water content, if the surface humidity is too large, the floor will be paved after the evaporation of water inside out, leading to the floor of deformation. Paving work is now required to have moisture content meter. Second, the flatness of the ground testing. If the keel laying method, the moisture content of the keel and the smoothness of a request for. The third step is a fixed keel, provides for a solid formation. Finally, the floor laying. Meanwhile, Ms Yang is also special emphasis on reminding consumers, for
Flooring
Do not over-pursue a color, if color is quality paint, and wood color itself is not a quality problem.
