subject: The Best Choice for Integrated Fans---DM800 Satellite Receiver [print this page] The Best Choice for Integrated Fans---DM800 Satellite Receiver
When we talk about DM800, many fans of satellite TV must have known something about it. DM800 is the product of a German company DREAM MULTIMEDIA and also the advanced version of DM500. The biggest feature of DM800 is that it can receive the HD (High Definition) signal and it has the ability of DVB-S2/S dual-demodulation and MPEG-2/H.264 dual-decoding. If you add an IDE (Intelligent Diver Equipment) hard disk inside the machine, you can also record the TS video steam to your hard disk. The outward appearance of DM800 is all black and is very exquisite. There is a remote controller, an AC adapter, an AC wire, a HDMI to DVI wire, a Scart connector and a RF (Radio Frequency) connector inside the package besides the receiver main body. The remote of DM800 is a little larger than DM500's because it has 9 more buttons. The main function of the DM800's remote controller is same as DM500's and it can also be used to control DM500. The smartcard reader slot is inside the gate on the left side of the machine and the OLED screen is on the right side of the front board. The volume of the machine isn't big though, it has many ports/interfaces at its back side, includes LNB (Low Noise Block) ports, COM interfaces, DVI interfaces, Internet ports, Scart slot, eSATA port, modem port, USB 2.0 ports, S/PDIF (SONY/PHILIPS Digital Interface) slot, and a 12V AC socket. The COM interface is used to upgrade the operating system or connect GPRS COM equipment. The transmission speed of COM interface is low, so you have to wait 1 hour when you are upgrading the system. DVI interface is used to output the video and audio steam to TV. You can also use a DVI to HDMI line to make the port into HDMI standard. LAN interface is use to manage the receiver though internet. eSATA port is used to connect SATA hard disk. The original tuner on the receiver is BSBE2 401A produced by ALPS, a Japan company. DM800 can use a DVB-C digital cable TV LNB or a DVB-T digital wireless TV LNB. DM800 has two HYUNDAI DDR400 memory kernels and their memory capacity is 128MB all together. The CPU of DM800 is BCM7401, a 300MHz MIPS chip. It can decode the H.264/VC-1/MPEG-2 video, so it is the most important part of the machine. The control chips are a SP3243EEA chip produced by SIPEX and an EEPROM Z27W40180K6 chip.