subject: Digital camera using problems and solutions (part 3) [print this page] Digital camera using problems and solutions (part 3)
Continue with "Digital camera using problems and solutions (part 2)". Articles resource from Supply-batteries.co.uk and Batteries-home.com . Author Liushui.
10. the camera can't identify memory card
(1). Use a digital camera does not compatible with the memory, different digital camera use memory is endless and identical, in most digital camera cannot use more than one type of memory card. Solution is to change your digital camera can make some memory card.
(2). Memory chip damage, and find manufacturers replace memory card.
(3). The image file within the memory destroyed. This phenomenon is a result of the photographic process memory, removed, or because the power serious deficiency caused by digital camera abruptly closed. If re-insert memorycards or in again power, question orexists words, formatting of your memory card.
11. Photos cannot appear on the LCD screen
(1). Power closed or open a journaling mode. Will record/play switch is set to play position, and processing power.
(2). SmartMedia card without photos. To check the control panel.
12. LCD display screen blurred
(1). The brightness set wrong. The broadcast mode, from the menu options ERIGHTNESS and adjusted.
(2). The sun shining on the screen. Use hand obscure sunshine.
13. camera link computers to transmit data computer occurs when the error messages
(1). The computer not plug-and-socket good, canon bp-511 charger correct plug-and-socket cables.
(2). Power at the end of the open. Press the power button processing power.
(3). Battery runs out. Update the battery or ac power adapter connect device.
(4). A serial port improper selection. With operating system software confirm whether a serial port choice is proper.
(5). No serial port is available. According to the personal computer instructions for a free serial port (limited to AppleTalk/Macintosh switch LocalTalk function).
(6). Image transmission speeds first choose incorrectly. On the computer to choose the nikon en-el11 battery right transfer speed.
(7). Not to install Plug In TWAIN /. TWAIN/Plug In will be installed In the computer.When press any key all cannot make any operation, please press CARDS cover the reset button, and then press the power button.
14. plus electric liquid crystal display (LCD) can't display properly after current status
Under normal circumstances, plus electric after LCD should be able to display the current condition, and normal as functional set of changes and film progresses, monitor, accordingly. Such as plus electric after LCD display the current state, should not normally most cases are battery contact undesirable or electricity shortage be caused by. Can again pack good batteries or replace new battery. Replace new battery, notice must change entirely, can't old and new batteries in practice.
15. LCD display images have obvious flaw or appear screen
Add after power LCD display the current state and nikon coolpix p5000 battery can normal function setting, but not normal display images, the picture has obvious flaw or appear screen. Appear this kind of circumstance, majority is CCD image sensor or damage caused by defects. At this time, should replace CCD image sensor. This kind of situation occurs in second-hand digital camera, the choose and buy secondhand digital camera, must carefully identify CCD image sensor. If the camera is not LCD display, CCD imaging device generally cannot directly the stand or fall of judgment, sometimes of CCD damage but when shooting all normal, until the computer download photographs discovered pictures was dark, so only through the quality of the images will check output.
16. computer can not download properly photos
This kind of situation is most computer connections have problems. In accordance with the camera interface is different, the computer connecting mode, and common standard string many mouth attachment is has 3 kinds, besides a USB other wires. For attachment operation must be in place, not loose, as shown in figure 7-6 below. Conditional word, had better have a spare attachment, such attachment occurred problems can change in time.
