subject: Qiqihar No. 1 Machine On Display All Kinds Of New Tools In Ccmt2008-ccmt, Qiqihar No. 1 Machine Tool [print this page] Qiqihar NoQiqihar No. 1 Machine Tool Plant
HT315X160/200Q -NC CNC heavy duty horizontal Lathe Deyang, my company design and manufacture of the double group of heavy equipment, can turning cylindrical surface, conical surface, face, cutting, thread and rotary surface, suitable for the rotor, spindle, precision heavy-duty roller and other large parts of fine precision rotary processed and semi-finishing. The machine is heavy duty horizontal lathe our products, to learn foreign advanced technology heavy truck manufacturing, good rigidity, high efficiency, good accuracy to maintain, in use with high economic and practical.
Structural characteristics: it carries up to 200 tons, workpiece length 16 m And with Two-carrier structure, which can be processed, processing efficiency.
Chuck Screw structure by mechanical force, easy operation and reliability.
Separate the workpiece and the tool carrier bed bed (1700 +1700) portfolio, the overall tailstock structure, good rigidity.
Closed center of the new frame structure design, the buoyant buoyant sleeve hydraulic structures, and increased manual fine-tuning the structure of the workpiece center adjustment accuracy is up to 0.01mm Less.
Slide the static horizontal and vertical guideways hydrostatic pre-pump oil used technology to meet the heavy issue of moving parts of the oil film stiffness and improve the stability of the feed system.
blade plate for the motor movement control, automatic clamping, travel up to 8OOmm.
BVGM315 5/20Q-NC CNC milling machine Use of modern advanced technology, advanced design methods, advanced machine tool performance, high efficiency, low noise, green, safe and reliable operation, long service life. The machine is suitable for high-speed steel and carbide milling cutter tooth. A fully enclosed shield machine, selection of high reliability components, made famous milling head, Mills Frame, X, Z axis for the whole closed-loop control and rotary table detected by Heidenhain circle grating. Specifications of the machine is used in rough pieces of gear tooth milling.
Main technical parameters Table diameter 2830mm Maximum workpiece height 500mm Maximum workpiece weight of 20t The level of vertical turret
trip -1000 ~ 1880mm Vertical stroke 800mm Vertical turret fast motion speed 8000mm / Min
Milling cutter speed range 25 ~ 150r/min
Main motor power S1: 28kW/S2: 38kW
BVG250 5/15L 15L -NC CNC vertical Grinding machine Advanced, reliable, high precision, high rigidity, high efficiency, vibration performance, reliable operation and long service life, machine is fully enclosed structure, environmental protection, noise less than 75db. Grinding machine frame X, Z axis for the whole closed-loop control, B axis 45 can be used for indexing. Machine with HEIDENHAIN circular grating, sub-degree accuracy; table use German SAV round electric magnet chuck, card holders of deformation on the workpiece, a fixture can complete the three-ring bearing surface processing, grinding wheel, diamond wheel dressing can be effective improve machine efficiency. Tool grinding speed for the 1500-3O00r/min (wheel diameter 260 a 4O 0mm ), For processing diameter 2500mm Weight up to 15t of the workpiece.
The machine is suitable for wind turbines and rotary bearing such as bearing industry, mainly used for grinding the bearing outer raceway processing. Products reached the international advanced level of similar products.
BVDM315 5/20L-MC Vertical milling and drilling Machining Center Apply to wind turbine bearings and other rotating parts drilling and tapping machines are totally enclosed protection, with about automatic disc tool magazine and automatic chip removal tool within the cooling device. All processing are programmed, a clamping area of a circle to be completed by week over the direction of light hole and thread size processing.
Main technical parameters Maximum workpiece swing diameter 3150mm Table diameter 2500mm Spindle to table distance 100mm (Minimum)-7O 0mm (Max)
Maximum workpiece weight of 20t Fast motion speed drilling tool holder 8000mm / Min
Tool knife around the median of 24 Main motor power 22/30
