subject: WAN Service Provider Transmission Network [print this page] WAN Service Provider Transmission Network
DTE-DCE
From the point of view of connecting to the WAN, a serial connection has a DTE device at one end of the connection and a DCE device at the other end. The connection between the two DCE devices is the WAN service provider transmission network. In this case:
Full Post:
DTE-DCE WAN Service Provider Transmission Network.
DTE-DCE WAN Service Provider Transmission Network.
The CPE, which is generally a router, is the DTE. The DTE could also be a terminal, computer, printer, or fax machine if they connect directly to the service provider network.
The DCE, commonly a modem or CSU/DSU, is the device used to convert the user data from the DTE into a form acceptable to the WAN service provider transmission link. This signal is received at the remote DCE, which decodes the signal back into a sequence of bits. The remote DCE then signals this sequence to the remote DTE.
The Electronics Industry Association (EIA) and the International Telecommunication Union Telecommunications Standardization Sector (ITU-T) have been most active in the development of standards that allow DTEs to communicate with DCEs. The EIA refers to the DCE as data communication equipment, while the ITU-T refers to the DCE as data circuit-terminating equipment.DTE-DCE
From the point of view of connecting to the WAN, a serial connection has a DTE device at one end of the connection and a DCE device at the other end. The connection between the two DCE devices is the WAN service provider transmission network. In this case:
The CPE, which is generally a router, is the DTE. The DTE could also be a terminal, computer, printer, or fax machine if they connect directly to the service provider network.
The DCE, commonly a modem or CSU/DSU, is the device used to convert the user data from the DTE into a form acceptable to the WAN service provider transmission link. This signal is received at the remote DCE, which decodes the signal back into a sequence of bits. The remote DCE then signals this sequence to the remote DTE.
The Electronics Industry Association (EIA) and the International Telecommunication Union Telecommunications Standardization Sector (ITU-T) have been most active in the development of standards that allow DTEs to communicate with DCEs. The EIA refers to the DCE as data communication equipment, while the ITU-T refers to the DCE as data circuit-terminating equipment.
