subject: What Is 192.168.2.1? [print this page] "192.168.2.1" as a Default Address "192.168.2.1" as a Default Address
This is a common IP address that several home networks utilize to institute a default gateway. The attributes of private IP is that, they could be utilized over and over again as long as they"re on dissimilar networks. It must be noted that private Internet Protocol addresses are non-routable; only 1 device at a time on a network should utilize this Internet Protocol address to prevent from IP address conflicts.
The Function of the IP Address
All PCs have Internet Protocol addresses. These are utilized by servers or networks in order for identification. This particular address belong to IPv4 private line category. This line is recently being utilized by Belkin for broadband routers. If you check the homepage for its router, it is the installed default IP address.
How it Works for Networks and Routers
Since it is the default address in routers, it becomes standard by which data is processed. 192.168.2.1 address operates with networks and routers in multifaceted ways.
The simplest way to describe it would be, "it holds data". For instance, info is requested from the Internet. When this request is sent, the IP address operates with the nodes to assist the action.
Changing the Settings
It is easy to change usernames or passwords. Simply log in to the homepage and do the alterations. Apart from user accounts, it is as well possible to alter many other functions. If you are on a network, you could also change the modem, DSL and any other settings of communications.
Troubleshooting
There are some problems that you may run into. If you apply LinkSys application and forgot the password, you could reset your broadband router. If you encounter problems in your connections, proceed to "My Network Places". Find properties in the TCP/IP or LAN. These are the things to check if you run into problems with your connections.
Other problems could be attributed with firewalls. The actions of the Address and the router or the network could be affected by firewalls.
