subject: Taking Care of the Inkjet Printer - Part 1 [print this page] Taking Care of the Inkjet Printer - Part 1
Run a test page
Running a test should enable you to try out if the printer works well or not. This enables you to test print. Usually, almost all printers have this feature. If you are unsure, you could check out your manual to see if your printer has a 'run test' capability. You should be able to see this when you go to control panel to check out printer properties.
Use the right type of paper
Most of the time, shoddy prints are the results of putting the wrong paper in an iinkjet printer. This means that you need to use the right type of inkjet paper for your printer needs. Photo prints can be used in inkjet printers. Make sure that your photo paper is of high quality - crispy and glossy to feel. Large formatted papers also are good when you print large printing materials.
Clean out printer heads
Printer heads can be cleaned immediately by most printers. But if you are unsure how to do this, you can clean out printer heads by using the manual. Find the cleaning properties, and then this should give you the entire mechanism of the printing process.
Upgrade memory
Sometimes, what your inkjet printer needs is an upgrade. You should be able to do this by buying memory cards. However, before doing that, you should be able to examine the memory of your printer. Once you upgrade your printer's memory then you are off to a better and faster quality types of prints.
Having said all these, it is wise that you look for the best inkjet printers on Best-Cheap-Printer.com Store now at discounted prices.
