subject: Large steam room paint protection ZD-S90 Market Selling Well - Zhongshan University, paint room - Automotive repair and maintenance industry [print this page] Large steam room paint protection ZD-S90 Market Selling Well - Zhongshan University, paint room - Automotive repair and maintenance industry
Beautiful car paint can not only play a role, but also protect the body. Body paint, once damaged, will require a series of very specialized facilities and technology to repair, Paint room Body paint repair process is an important device. Recently, reporter Market Found a Large ZD-S90 Paint room Be favorable for many consumers.
It Sell Personnel, Zhongshan University ZD-S90 reason by consumers, with its own qualities are inseparable, Zhongshan University ZD-S90 housing body for the assembled structure, both inside and outside the plate produced by Baosteel color steel, filled 58mm thick glass wool insulation material, and filled within the frame, making the entire wall, high strength, excellent sealing performance, flame and strong, effective insulation. Housing in vitro anti-static surface affixed to a transparent protective film, not easy to produce electrostatic interaction. Aluminum frame around the Decoration So that the paint room elegant appearance and durability.
At the same time, ZD-S90 the control system PLC control, large-screen color LCD display all operation, automatically displays a variety of working conditions, provide spraying, paint the necessary procedures. The main components used in all imports and domestic brands such as Siemens contactors, Japan, OMRON temperature controller with anti-pressure, explosions, and over-temperature alarm, anti-open phase, the multiple protection against misuse, safe operation superior performance.
Compared with other products, ZD-S90 is the biggest highlight of heat exchangers made of imported high-quality heat-resistant stainless steel by TIG welding, the three cycle structure, heat transfer area, heat exchange efficiency, can cut short heating time, the design Shihai with explosion-proof pressure relief safety devices are safe and reliable to use.
Said, according to sales staff, in general, paint room, good or bad should measure the following aspects:
1, brightness. In general, need to paint the room brightness 800-1000 Leke Si, and the need to use close to the D65 light source, while the room walls should be matte white;
2, the air flow. Uniform from top to bottom paint the room air flow, the flow rate of 0.2-0.3m / s;
3, the filtering effect. This depends on the type of cotton roof paint, general repair works are EU5 and EU6 use two models, you can use the paint room when the lights in the room with sun exposure to the upper, usually very small dust per square meter should be less than 5;
4, seal the walls. Paint room must be sealed and the seams should not be painted in the accumulation of dust;
5, to ensure positive pressure. Paint room into the air flow should be slightly larger than the wind, so keep the paint room under positive pressure;
6, heating system, seal. Around the burner and the chimney should be sealed well, can not occur after burning putty;
7, the heating rate. Paint room from 20 to 60 the time spent is about 10-15min, also should be noted that some are not allowed to paint room thermometer to measure temperature in order to paint the room when the temperature of metal body prevail.
