subject: Several Tips to Make an Electric Wall Sconce [print this page] Several Tips to Make an Electric Wall Sconce
When you are going to make an electric wall sconce, it will be a good idea for you to use a kit and replace the existing lighting features. If you decided to choose installing the new wiring, you can either go with the battery-operated sconces or hire the electrician to run the new wiring. Installing wall sconce can certainly add to the feel of the room. If you prefer using the low-watt energy safer bulbs, you will be able to create a soft glow that can save your money over time. So, just take a look at the following tips that will guide you to make an electric wall sconce.
As the first step, you should determine about the location in which you are going to place your new wall sconces. You need to choose the areas that can enhance the room and are also not directly above any seating. If you are going to install this lighting fixture on an unused part of the wall, you need to make a mark on the each spot by using chalk.
For the second step, you need to gather all of the items that are required for making this lighting fixture, and then place them on the clean dry surface. After that, you have to assemble the new sconce kit prior to the installation. You should make sure that all of the fittings are tight except the faceplate because it is required to be easily accessed.
The third step is to turn the electricity off and then light the switches of the room or wall where you are working. When installing new lighting fixture, you will need a hole to cut in the wall and also new electrical wires to be installed. In installing a new wiring, it is recommended for you to hire professional electrician.
The fourth step is to cover the wiring by using faceplate of the new sconce. You should follow the guidelines from the manufacturer and then attach it to the wall. After that, you need to tighten faceplate to the rest of the sconce.
