subject: Painting a Ceramic Wall Sconce [print this page] Painting a Ceramic Wall Sconce Painting a Ceramic Wall Sconce
When you feel bored with a white wall sconce that you want to brighten up with little pain, now you can try to paint a ceramic wall sconce for obtaining different ambience in your room. In painting ceramic, whether you are going to paint wall fixture, ceramic tile, or pottery, all the painting process is similar. By using the right paint, you will get a terrific and long lasting finish. In order to obtain the best results, you should choose oil based paint in the high gloss or semi gloss. It is because when you choose water based paints, you will find that they can easily peel from the ceramic surfaces. By checking out the following tips, you will know the easy ways to paint a ceramic wall sconce. So, just take a look.
The first thing that you have to do is to thoroughly clean your ceramic sconce by using a mildly abrasive bathroom cleaner. You have to make sure that the sconce is certainly clean in order to avoid particles and grease from interfering with the paint.
The second thing that you should do is to lightly sand the wall sconce surface by using a fine grit sand paper. This sanding process will create texture which can allow the paint to adhere to the ceramic.
The third thing that you need to do is to use damp rag for wiping off any sanding dust.
The fourth thing is to brush on the paint by using good quality paint brush. You need to use thin, even the strokes and you should also avoid feathering at the end of the brush stroke. The multiple coats of the paint ca create a more durable finish than when you use one thick coat. After that, you can allow the each coat for completely drying before adding another.
The last thing is to allow the oil based paint for drying for about two to three days. Then, you should brush on the coat of the water based urethane. The urethane will be able to protect the surface from scratching and peeling.
