subject: What Work Must Be Completed in My Bathroom Before I Replace the Bathroom Suite? [print this page] What Work Must Be Completed in My Bathroom Before I Replace the Bathroom Suite?
You'll have plenty of work to do before you start replacing a bathroom suite. It's crucial to know what work needs to be done, to make the process as smooth as possible. Here are some tips about the most crucial tasks that you'll need to complete before you start fitting the bathroom suite:
1. Have the right tools for the right job.
This is crucial for any DIY project, such as preparing to replace an entire bathroom suite. Here are some tools that you'll need:
adjustable spanner (2)
chisel
cloth
club hammer
level
pencil
pliers
putty knife
screwdriver
tape measure
trimming knife
wrench
In all likelihood, you won't have any trouble finding these tools at your favourite neighbourhood hardware store. Make sure to secure all of them, to minimise any difficulties that you could have later.
2. Remove the large bathroom fixtures.
Typically this will include the sink, toilet, and bathtub. If you've already secured the aforementioned tools, then you'll have the right ones to remove these major fixtures. Before removing them, make sure to do your homework, so you know what you're doing. If you have any doubts about taking a DIY approach, then hire a professional plumber to do it. While this may hurt your pride, it could ultimately prevent a lot of costly damage!
3. Remove floor (and wall) tiles.
Regardless of what kind of tiles you remove from your kitchen, essentially they'll require the same procedure. Using a putty knife, the tiles will probably pop up fairly easy. This is particularly true if the grout underneath is dry and brittle. You may also need to extract some grout, to make your job easier. For grout that's especially hard to remove, you'll likely need to call in reinforcements - chiefly, a small hammer and chisel.
4. Do demolition with care.
While demolition is often needed before replacing a bathroom suite, it's not a walk in the park. If there's one task that you should avoid doing yourself before remodeling your bathroom suite, then this is it! But if you decide to pick up a sledge hammer and do the demolition itself, then make sure to take certain precautions:
cut all power in the bathroom before you start your demolition
seal off all areas not part of the demolition
know exactly what's behind a wall before you start swinging
approach the demolition as a separate aspect of the remodeling process
pick up any debris during the demolition process
5. Do your homework.
Before you replace a bathroom suite, you'll need to create a design for the bathroom, and secure all the materials needed. Order the materials early enough before their installation. The perfect remodeling design will be useless without the needed materials!
When replacing your bathroom suite, there's plenty of work to do before the main event. These tips will help to make the whole process as smooth as possible. Taking the right steps from start to finish will make your bathroom remodeling a triumph!
Derek Rogers is a freelance writer who writes for a number of UK businesses. ForBathroom Suites and Furniture, he recommends Click Bathrooms
